Specification:
1.PP Sediment Filter
The main function of sediment filter is to remove large and fine particles from a drinking water.The filter can reduce 99.99% sand, scale, rust, sediment, particles.Will greatly help reduce microparticles in the water.The filter can filter up to 13,000 gallons of water depending on the water quality. The filter should be replaced every 3-6 months so that you can continue to taste the fresh water.
Specification
Pore Size(μm): 5.0
Size(inch):10
Material:100%melt-blown thin fiber
Outer Diameter(mm):63
Inner Diameter(mm):28
Recommended Change-out Differential Pressure(Bar):2.1bar@20℃
Maximum Operating Differential Pressure(Bar):1.0bar@70 ℃; 3.5bar@20 ℃
Maximum Operating Temperature(℃):80℃
Lifetime: Replace the cartridge every 6 months.
2.CTO Carbon Block Filter
Sintered activated carbon filter is made of high quality coconut shell carbon. Outer layer has food grade plastic net wrapping PP non-woven fabrics. Reduces sediment, chlorine, taste and odor, etc.
Drop-in designed for easy and quick filter change. Durable and sealed end caps with sealed silicon O-ring prevent leak. Compatible with Penteck EP-10, DuPont WFPFC9001, Whirlpool WHA2BF5, GE, Culligan D10-D, watts WCBCS975RV, etc.
Specification
Carbon Block Water Filter Cartridge
Micron rating: 5 Micron
Size: 10” x 2.5”
Max. Pressure: 80 psi
Max Temperature: 104°F (40°C)
Material: Premium Quality Coconut Shell Carbon
Lifetime: Replace the cartridge every 6 months.
3.GAC Granular Activated Carbon Filter
SimPure Granular Activated Carbon (GAC) Water Filters is made of highly porous coconut shell carbon with high adsorption capacity, providing effective reduction of chlorine, from your water. Remove chlorine, suspended particles, tastes and odors from water for drinking water.
Fits for most under sink filtration, RO/DI filtration system,10” standard whole house filtration system or any type of water filtration unit with 10" housing.
Specification
Granular Activated Carbon Water Filter Cartridge
Micron rating: 5 Micron
Size: 10” x 2.5”
Max. Pressure: 80 psi
Max Temperature: 104°F (40°C)
Material: Premium Quality Coconut Shell Carbon
Lifetime: Replace the cartridge every 6 months.
4. 75 GPD Reverse Osmosis Membrane
High Quality RO Membrane—Thin Film Composite membrane, rejects impurities down to 0.0001 micron. High permeated flow and stable salt rejection.
Specification
Material: Thin Film Composite Reverse Osmosis Membrane
Average Permeated Flow: 75 GPD
Filter accuracy: 0.0001micron
Stable Rejection Rate: 96 %
Test pressure: 60 psi
Recovery Rate of Single Element: 15%
Max Feed water Temperature: 45°C(113°F)
Max Working Pressure: 300psi
Max Feed water Permeated Flow: 7.6LPM (2.0GPM)
pH Range of Feed water during Operation: 3~10
Max Feed water SDI15: 5
Residual Chlorine Concentration of Feed water: ≤0.1ppm
Lifetime: Replace the cartridge every 24 months.
Universal Filtration
Standard sized fits any standard 10 inch filter housing.
Compatible with systems from: Culligan, 3M, Aqua-Pure, GE, APEC, Pentek, Whirlpool, Global Water, iSpring, DuPont,etc.