Product Information

Durapro Graded Head Gasket suits Nissan YD25DDTI (YD25ETi) Non common rail Navara D22

Item Specifics
SKU: GSS3205SS1D
Returns: 30 Days
Ships From: Melbourne

Description

Durapro (GSS3205SS1D) Graded Head Gasket

0.900mm thick (0 notch)
Suits STD bore only

S3205SS-1 0 Notch 0.900mm

Variations for this Engine

These are the different Variations for the Nissan YD25DDTI (YD25ETi) Non common rail Navara D22 4 Cylinder Diesel Engine. Please check carefully you have selected the right part for your vehicle.

Durapro (GSS3205SS1D) Graded Head Gasket 0.900mm thick (0 notch)
Suits STD bore only
Durapro (GSS3205SS2D) Graded Head Gasket 0.925mm thick (1 notch)
Suits STD bore only
Durapro (GSS3205SS3D) Graded Head Gasket 0.950mm thick (2 notches)
Suits STD bore only
Durapro (GSS3205SS4D) Graded Head Gasket 0.975mm thick (3 notches)
Suits STD bore only
Durapro (GSS3205SS5D) Graded Head Gasket 1.00mm thick (4 notches)
Suits STD bore only
Durapro (GSS3205SS6D) Graded Head Gasket 1.025mm thick (5 notches)
Suits STD bore only
Permaseal S3205SS-2 Head gasket 1 Notch 0.925mm Thick
Permaseal S3205SS-3 Head gasket 2 Notches 0.950mm Thick
Permaseal S3205SS-4 Head gasket 3 Notches 0.975mm Thick
Permaseal S3205SS-5 Head gasket 4 Notches 1.000mm Thick
Permaseal S3205SS-6 Head gasket 5 Notches 1.025mm Thick
Permaseal S5610SS-1 Head gasket 0 Hole 0.900mm Thick
Permaseal S5610SS-5 Head gasket 4 Hole 1.000mm Thick
Permaseal V4835SSNHS Head gasket set See Notes From 6/08-On

Suitable For

Nissan

Overview

Graphflex® by Durapro® is a performance head gasket. Graphflex® head gaskets are composed of a 100% graphite facing material combined with a perforated steel core and stainless steel combustion flanges. The graphite facing material can withstand the motion of the cylinder head and block and the heat often experienced in a performance engine.

Because Graphflex® head gaskets are made from pure A-grade graphite they have a natural property which consists of thousands of flaky particles. Each flake is designed to withstand the movement of a cylinder head and block by acting similar to a multi-layered steel head gasket.

Graphflex® head gaskets also have a unique property referred to as “thermal conductivity”. That means the material actually transfers the heat away from the heat source. One good example of this is the small block Chevrolet. The back to back exhaust valves on this engine tends to create a lot of heat, often resulting in a burnt out head gasket. The Graphflex® head gasket allows the heat to move away from the hot spot to the coolant holes of the gasket, helping to prevent a head gasket burn out.

Plus, all Graphflex® head gaskets are genuine non re-torque and are impervious to corrosive coolants, fuels and oils. These are major problems for non-graphite based head gaskets and are solved by using a Graphflex® head gasket. Most Durapro® gasket sets include Graphflex® head gaskets similar to those used as original equipment by car manufacturers.

All Durapro® sets incorporate only the best materials that are all designed to perform better right down to the smallest detail. As a result these sets are all original equipment standard and come complete in most cases with genuine NOK® oil seals, US manufactured soft cuts, the highest grade cork componentry and silicon rubber and metal components that are second to none.

Durapro® gaskets are available to suit a full range of Australian, American, British, Japanese and Korean applications.

Other Parts for this Engine

These are the different parts available for the Nissan YD25DDTI (YD25ETi) Non common rail Navara D22 4 Cylinder Diesel Engine

Camshafts
Nason Left CAM1065 Camshaft Left Hand Exhaust Manifold Side - Ductile Iron
Nason Left CAM1067 Camshaft Left Hand Exhaust Manifold Side - Ductile Iron
Nason Right CAM1066 Camshaft Right Hand Inlet Manifold Side - Ductile Iron
Nason Right CAM1068 Camshaft Right Hand Inlet Manifold Side - Ductile Iron
Conrod Bearings
Taiho (R1050A 0.25) Set of 4 +010 Conrod Bearings Set STD 010 020 030 040
Shaft 51.954/51.974mm 2.0454/2.0462¨
Tunnel 55.000/55.013mm 2.1653/2.1658¨
Taiho (R1050A 0.50) Set of 4 +020 Conrod Bearings Set STD 010 020 030 040
Shaft 51.954/51.974mm 2.0454/2.0462¨
Tunnel 55.000/55.013mm 2.1653/2.1658¨
Taiho (R1050A 0.75) Set of 4 +030 Conrod Bearings Set STD 010 020 030 040
Shaft 51.954/51.974mm 2.0454/2.0462¨
Tunnel 55.000/55.013mm 2.1653/2.1658¨
Taiho (R1050A 1.00) Set of 4 +040 Conrod Bearings Set STD 010 020 030 040
Shaft 51.954/51.974mm 2.0454/2.0462¨
Tunnel 55.000/55.013mm 2.1653/2.1658¨
Taiho (R1050A) Set of 4 STD Conrod Bearings Set STD 010 020 030 040
Shaft 51.954/51.974mm 2.0454/2.0462¨
Tunnel 55.000/55.013mm 2.1653/2.1658¨
Cooling
Cylinder Heads
Nason 908510 Cylinder head bare Bare Head - 4 Inlet Ports D40T, D22 All, R51M D40M Up To 1/2010
Nason 908510-B Cylinder head - assembled Assembled Head - 4 Inlet Ports D40T, D22 All, R51M D40M Up To 1/2010
Nason 908527 Cylinder head bare Bare Head - 8 Inlet Port Suits R51M & D40M 01/2010 on
Nason 908527-B Cylinder head - assembled Assembled Head - 8 Inlet Port Suits R51M & D40M 01/2010 on
Exhaust Gaskets
Full Gasket Sets
Durapro (GSF4050SSND) Stainless Steel Full Gasket Set Does not include head gasket and turbo gaskets
Glow Plugs
Head Bolts and Studs
Head Gaskets
Durapro (GSS3205SS1D) Graded Head Gasket 0.900mm thick (0 notch)
Suits STD bore only
Durapro (GSS3205SS2D) Graded Head Gasket 0.925mm thick (1 notch)
Suits STD bore only
Durapro (GSS3205SS3D) Graded Head Gasket 0.950mm thick (2 notches)
Suits STD bore only
Durapro (GSS3205SS4D) Graded Head Gasket 0.975mm thick (3 notches)
Suits STD bore only
Durapro (GSS3205SS5D) Graded Head Gasket 1.00mm thick (4 notches)
Suits STD bore only
Durapro (GSS3205SS6D) Graded Head Gasket 1.025mm thick (5 notches)
Suits STD bore only
Permaseal S3205SS-2 Head gasket 1 Notch 0.925mm Thick
Permaseal S3205SS-3 Head gasket 2 Notches 0.950mm Thick
Permaseal S3205SS-4 Head gasket 3 Notches 0.975mm Thick
Permaseal S3205SS-5 Head gasket 4 Notches 1.000mm Thick
Permaseal S3205SS-6 Head gasket 5 Notches 1.025mm Thick
Permaseal S5610SS-1 Head gasket 0 Hole 0.900mm Thick
Permaseal S5610SS-5 Head gasket 4 Hole 1.000mm Thick
Permaseal V4835SSNHS Head gasket set See Notes From 6/08-On
Hose and Fittings
Inlet Manifold Gasket
Lifters
Main Bearings
NDC (MS-1229A 0.50) +020 Set of 5 Main Bearings STD 010 020 030 040
Shaft 62.951/62.975mm 2.4783/2.4793¨
Tunnel 66.654/66.681mm 2.6241/2.6252¨
NDC (MS-1229A 0.75) +030 Set of 5 Main Bearings STD 010 020 030 040
Shaft 62.951/62.975mm 2.4783/2.4793¨
Tunnel 66.654/66.681mm 2.6241/2.6252¨
NDC (MS-1229A 1.00) +040 Set of 5 Main Bearings STD 010 020 030 040
Shaft 62.951/62.975mm 2.4783/2.4793¨
Tunnel 66.654/66.681mm 2.6241/2.6252¨
Taiho (M1050A 0.25) Set of 5 +010 Main Bearings Set STD 010 020 030 040
Shaft 62.951/62.975mm 2.4783/2.4793¨
Tunnel 66.654/66.681mm 2.6241/2.6252¨
Taiho (M1050A 0.50) Set of 5 +020 Main Bearings Set STD 010 020 030 040
Shaft 62.951/62.975mm 2.4783/2.4793¨
Tunnel 66.654/66.681mm 2.6241/2.6252¨
Taiho (M1050A 0.75) Set of 5 +030 Main Bearings Set STD 010 020 030 040
Shaft 62.951/62.975mm 2.4783/2.4793¨
Tunnel 66.654/66.681mm 2.6241/2.6252¨
Taiho (M1050A 1.00) Set of 5 +040 Main Bearings Set STD 010 020 030 040
Shaft 62.951/62.975mm 2.4783/2.4793¨
Tunnel 66.654/66.681mm 2.6241/2.6252¨
Misc Gaskets
Miscellaneous
Nason NTG48S Brake vacuum gear Suits single row chains
Nason VK1012 Valve collet Suits 5.5mm Stem, 1 Round Bead
Piston and Rings
Piston Cylinder Sleeves
4 x Nason N3500B X 8.375 Sleeve Semi Finished: ID 3.470" x OD 3.686" x Length 8.375"
Nason N3500B X 8.375 Sleeve Semi Finished: ID 3.470" x OD 3.686" x Length 8.375"
Piston Rings Cast
Piston Rings Chrome
Pistons
Hypatec (PNIYD25TE40001H) STD Pistons Set Of 4 STD 020 040 (set of 4) Rings not included
Use RS6820 piston rings
Includes alfin inserts on 1st compression ring & oil gallery cooling 80mm length 43mm bowl OD
Compression height 48.8mm -18.1mm
Hypatec (PNIYD25TE40201H) +020 Pistons Set Of 4 STD 020 040 (set of 4) Rings not included
Use RS6820 piston rings
Includes alfin inserts on 1st compression ring & oil gallery cooling 80mm length 43mm bowl OD
Compression height 48.8mm -18.1mm
Hypatec (PNIYD25TE40401H) +040 Pistons Set Of 4 STD 020 040 (set of 4) Rings not included
Use RS6820 piston rings
Includes alfin inserts on 1st compression ring & oil gallery cooling 80mm length 43mm bowl OD
Compression height 48.8mm -18.1mm
Hypatec (PNIYD25TL40001H) STD Pistons Set Of 4 STD 020 (set of 4) Rings not included
Use RS6820 piston rings
Includes alfin inserts on 1st compression ring,
oil gallery cooling & MOS2 treated skirts
74mm long (44.5mm combustion bowl OD)
Compression height 49.0mm -20.0mm
Hypatec (PNIYD25TL40201H) +020 Pistons Set Of 4 STD 020 (set of 4) Rings not included
Use RS6820 piston rings
Includes alfin inserts on 1st compression ring,
oil gallery cooling & MOS2 treated skirts
74mm long (44.5mm combustion bowl OD)
Compression height 49.0mm -20.0mm
Hypatec (PNIYD25TL40401H) +040 Pistons Set Of 4 STD 020 (set of 4) Rings not included
Use RS6820 piston rings
Includes alfin inserts on 1st compression ring,
oil gallery cooling & MOS2 treated skirts
74mm long (44.5mm combustion bowl OD)
Compression height 49.0mm -20.0mm
Rear Main Seals
Small End Bushes
Thrust Washers
Timing Chain Tensioners and Guides
Nason Inner NCD46N Chain guide- cam chain Inner Guide- Slack Side: Suits 1/2010 on
Nason Outer NCD43N Chain guide- primary chain Outer Guide- Slack Side: Suits 1/2010 On
Nason Outer NCD45 Chain guide- primary chain Outer Guide 29.90mm Wide- Bottom Primary Guide
Nason Outer NCD45N Chain guide- primary chain Outer Guide 16mm Wide- Slack Side:Suits 01/2010 On
OEM CT93-OE Timing chain tensioner Primary Chain Tensioner- Suits Up To 01/2010: 31.40mm Width
OEM CT96-OE Timing chain tensioner Primary Chain Tensioner- Suits Up To 01/2010
OEM CT97-OE Timing chain tensioner Primary Chain Tensioner- Suits 01/2010 On: 26.00mm Width
Timing Chains
Nason NTK35-OET Timing chain kit Suits 01/2010 On- See Notes For Models
Nason NTKG20C-OET Timing chain kit Conversion Kit- Suits Up To 01/2010 (See Notes)
Nason NTKG20-OET Timing chain kit Includes Double Row Primary & Cam Chains- See Notes
Nason NTKG32-OET Timing chain kit Includes single row primary & double row cam chains- See Notes
Nason NTKG37-OET Timing chain kit Includes single row primary & double row cam chains- See Notes
Nason Single Row 3SR94HD Timing chain Primary chain- single row
Timing Cover Seals
Durapro (GSOSS0340D) Crankshaft Seal Front ID 50mm x OD 62mm x depth 7mm
Timing Covers
Nason OPN-YD25-BP Timing cover Suits D40 Thailand Build All and D40/R51 Spain Build to 01/10
Valve Cover Gaskets
Valve Guides
JCMC (VGNI-78-E) Valve Guide Exhaust only
OD 10mm ID 6mm length 45mm
JCMC (VGNI-78-I) Valve Guide Inlet only
OD 10mm ID 6mm length 60mm
Valve Regrind Gasket Set (VRS)
Durapro (GSV4050SSND) VRS Gasket Set Does not include head gasket and turbo gaskets
Use with CHNIYD258 8 port cylinder head
Permaseal V4835SSN VRS Gasket set See Notes From 6/08-On
Valve Spring Retainers
Valve Springs
16 x Nason VS1042 Valve spring Suits D40T, D22 All, R51M D40M Up To 1/2010
16 x Nason VS1047 Valve spring Suits R51M D40M From 1/2010 On
Nason VS1042 Valve spring Suits D40T, D22 All, R51M D40M Up To 1/2010
Nason VS1047 Valve spring Suits R51M D40M From 1/2010 On
Valve Stem Seals
Valves-Exhaust
8 x Nason EX9047 Exhaust Valve 25.90mm Head 105.50mm Length - Suits D40M R51M 1/2010 On
8 x Nason EX9127 Exhaust Valve 26.10mm Head, 106.40mm Length
JCMC (EVNI-108-E) Exhaust Valve Head 26.15mm x length 106.30mm x stem 6mm
Nason EX9047 Exhaust Valve 25.90mm Head 105.50mm Length - Suits D40M R51M 1/2010 On
Nason EX9127 Exhaust Valve 26.10mm Head, 106.40mm Length
Valves-Inlet
8 x Nason IN9046 Inlet Valve 28.50mm Head 106.00mm Length - Suits D40M R51M 1/2010 On
8 x Nason IN9126 Inlet Valve 28.10mm Head 106.80mm Length
JCMC (EVNI-108-I) Inlet/Intake Valve Head 28.15mm x length 106.75mm x stem 6mm
JCMC (EVNI-108-I) Inlet/Intake Valve Head 28.15mm x length 106.75mm x stem 6mm
Nason IN9046 Inlet Valve 28.50mm Head 106.00mm Length - Suits D40M R51M 1/2010 On
Nason IN9126 Inlet Valve 28.10mm Head 106.80mm Length

Web Store Pty Ltd is a Melbourne based warehouse with thousands of the latest products at great prices. We hand select our range of Australian designed products from only the best local suppliers. We pride ourselves on our customer service and our friendly team are available to assist you through the buying process. When comparing prices know we only sell great quality items and our manufacturing passes strict quality checks before posting.

To ensure a smooth transaction, please follow the payment instructions laid out in the eBay system. If you are new to eBay and unsure how to purchase, please don't hesitate to get in contact with us as our Customer Service team will be happy to assist.

The simplest way to facilitate payment is via Mastercard, Visa, or Paypal via the Checkout process.

Please contact us if yous wish to pay via direct deposit and then we can supply our Account and BSB details.

If paying by bank deposit, please ensure you have your reference of your payment with your eBay user ID so we can identify the payment as yours. Failure to correctly reference your payment will cause a delay in our system which will ultimately delay the shipment of your order.
We check our bank accounts daily so as soon as your payment has cleared, we will start processing your order.

Our stock levels can change at any time. An order is only complete once payment has cleared. To prevent missing out, it's best to pay as soon as possible. Once a payment has cleared, 90% of products are dispatched within 1 business day, however please see our shipping page for estimated shipping times by state. Wedding Wish is not liable for any unidentified payments or delays of delivery due to failure to follow instructions during checkout.

For all payments outside of eBay, please ensure you send us the reference you used, the day and time you paid, and the amount deposited.

As always, if you have any questions, please get in contact with our Customer Service team who are more than happy to help.

We are happy to combine shipping on any orders. Individual listings with combined shipping will automatically calculate on checkout. When buying from multiple listings, please message us prior to purchase to confirm postage rates, be sure to include your postcode for accurate quoting and the items you are after. Express post is available on request for most orders, please note handing times will usually still apply.

Pre-arranged pickup is available from our warehouse in Dingley Village, Victoria. Please note that a handling time will still apply. Please call ahead or email us to ensure item is available for pickup.

POSTAGE & DISPATCH

After payment is cleared 90% of all items are dispatched within two business days, however please see below for estimated delivery times by state. Your item will be sent via courier or Australia Post depending on its size and weight.

Where goods are sent through Australia Post, the buyer may receive a knock on the door or a card in their letterbox indicating their item is available for pickup from their local post office.

A re-delivery fee will be charged to buyers for items that are undeliverable and/or returned due to incorrect delivery address or unsuccessful delivery.

Buyers have the full responsibility to provide us with the correct delivery address and mobile phone number on the checkout page before payment. Any changes to address after checkout will not be considered as valid.

Our staff work tirelessly to ensure customer satisfaction however we understand that on occasion issues do arise. If you have a problem with your purchase please contact us PRIOR to leaving feedback and we will do our best to rectify the situation.

Claims entered directly via this method will be given priority.

The fastest and best way to contact us is through the eBay messaging system. If you contact us out of eBay we may not see your message and our support team will be much slower in dealing with your issue. Thank you for your business!

Copyright (C) 2018 Web Store Pty Ltd. All Rights Reserved