eBay

MEGAN RACING AUTHENTIC PRODUCT

MEGAN RACING ADJUSTABLE DAMPENING AND HEIGHT COILOVERS

PART NUMBER:
MR-CDK-AE86

APPLICATION FITMENT:
TOYOTA COROLLA 1984-1987

These dampers are NOT a Direct Bolt-On, however, because you need to Re-Use your OEM front spindles. We did this to maintain a lower cost for the enthusiast, as the OEM spindles are perfectly able to be reused in most cases. The operation is simple and most shops that have the ability to weld using either a MIG or TIG welder can complete the process in usually under an hour.

After removing your front Shock casings with the spindles, mark off 40mm from the top of the spindle base and cut. Once you have the spindles with 40mm of tubing protruding from them, simply slide the Megan Casings over the shock casings until they are sitting against the spindle casting, and simply weld COMPLETELY around the casing with either a MIG or TIG welder (NOT AN ARC WELDER!!!). Once this is done, simply screw on the bottom bracket onto the suspension system and you are ready to go re-assemble your front suspension.

**IMAGES ARE NOT SPECIFIC TO THE MAKE, MODEL AND YEAR OF YOUR VEHICLE**
**ITEM WILL BE SHIPPING DIRECTLY FROM THE MANUFACTURER **

COILOVER SPECIFICATIONS

SPRING RATES:

F: 62mm ID; 180mm length; 8 kg/mm

R: 62mm ID; 160mm length; 6 kg/mm

DAMPER SPECS:

F: 110mm stroke; 250mm length; M2 valving code

R: 129mm stroke; 230mm length; A1 valving code

- 32 Levels of Damper Force Adjustment

- Pillow Ball Upper Mounts

- Rubber Dust Boots

- Adjustable Ride Height

- Aggressive Spring Rates

- Single-Cylinder Design

- Aluminum Brackets

32 Levels of Adjustment:

1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.

- All coil-over damper kits come with 1 year manufacturer-defect warranty.

- All Hardware is Included

PRODUCT DESCRIPTION
Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.