FOXWELL NT726 Full System Diagnostic Tool with 8 Maintenance Reset Functions 
(NT726 is NT624 Elite Upgraded Version) Touch Screen / Smarter & Faster
NT726 is newly developed diagnostic scanner with Andorid 9.0 operating system. It offers techinicians and enthusiasts an easy and affordable solution to pinpoint troubles of engine, transmission, ABS and airbags on major American, Asian and European makes. Besides, it can supports common required service functions including Oil Reset, EPB, TPS, SAS, TPMS , DPF, Injector and ABS Bleeding.

FOXWELL NT726 Support 8 Specials Function（Lifetime Free Update!）
These functions will help you repair cars more easily and much faster. What's exciting is that even average car owners and beginners can use these functions.
Please always remember that we provide lifetime free online tech support.

1. ABS Bleeding: Exhaust or Remove air in Brake System
Whenever you change a part of the brake system, you will need to bleed the brake system afterward. This means to exhaust or remove all the air in the system. Due to the air is compressible, it would make the brake pedal will feel soft. Once the brake pedal being soft and mushy, the air will have to be pushed out of the way before the fluid can do what it is supposed to do. This can be dangerous because it means that it will take longer to stop. Generally, bleeding brakes aren't too hard, but what if air gets in the ABS Module. Well, bleeding the ABS module can be a bit more of a challenge. You might need to take this tool to cycle the valves in the ABS module to let the air out. This you can get a stable and reliable brake, drive more safely.
Exhaust the air in Anti-Lock Brake System automatically,easily, fast and precisely..
2. DPF Regeneration & Reset
Diesel Particulate Filter (DPF) :
DPF Regeneration menu lets you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. When a DPF regeneration cycle is completed, the DPF light automatically goes off
3. Injector Coding:
Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity. 
After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection
4. Throttle Body Alignment (TPS/TBA):
It’s very common to see a customer pull into the shop with a Foe Volkswagen or For Audi that just will not idle correctly. One of the possible causes is that the throttle position is not known. When the motion range is not known, the ECU simply has no idea where to set the throttle. The ECU must know the full range of motion of the throttle in order for it to properly control the engine.50 NT7X6 Series User's Manual V1.2 Using the throttle position sensors in the throttle body, the ECU learns the full open and full closed positions through various states (idle, part throttle, WOT) known as a Throttle Body Alignment (TBA)
5.SAS Steering Angle Calibration
SAS Calibration menu lets you perform calibration of the Steering Angle Sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. On successful calibration of the sensor, its fault memory is automatically cleared.
6. TPMS Reset: Tire Pressure Monitoring System Service:
TPMS Service menu allows you to check the tire sensor IDs from the vehicle ECU and  reset after tires and/or TPMS sensors are replaced and/or tires are replaced. The sensors must be already programmed. Blank sensor won't work. 
This tool can NOT program blank TPMS sensors.
Another tool: Foxwell T1000 TPMS Programmer can program new and blank TPMS sensor model: Foxwell T10. 
7. Oil Reset:
Reset the Interval of oil service cycle (turn off the Oil Service Light) when the replacement of engine oil is done in case of the impurities in oil may damage the engine. So vehicles can recalculate another optimal oil life change interval depending on the vehicle driving conditions and climate. Your driving safety also gets ensuring.
The Oil Service Indicator System is designed to alert the driver when the vehicle is due for a service. Oil reset methods are determined by the vehicle being tested.
● Oil Reset with One Button
● Manual Reset
● Auto Reset
8. EPB Maintenance -- Electronic Parking Brake Service:
This tool can Put car at maintenance mode, then the car ECU will wind back electronic EPB calipers automatically, so you can replace electronic brake pad & disc very fast, very easily, and precisely.  Reset the brake pad after the repairs in the electronic parking brake system is done, which includes deactivation and activation of the brake control system, bleed brake fluid, open and close brake pads, and setting brakes after disc or pad replacement. Diagnoses EPB caliper functionality, initializes the wear indicator if new pads are installed and deactivates or re-activates brake control system. By using this function, the braking process is therefore made much simpler and easier. No more hours of sweat. 
EPB maintenance service allows you to perform the service and maintenance of EPB brake systems, including:
Deactivation and activation of the brake control system,
Bleeding brake fluid,
Opening and closing brake pads,
Setting brakes after disc or pad replacement,
on multiple brands of vehicles where electronic brake systems are fitted

FOXWELL NT726 Support Full System Diagnostic Scan（4 kinds functions）
1. Read Fault Codes on All Systems.
2. Read Data Stream on All Systems, Graphic Data Display, help you understand the reading 
3. Read System Information on All Systems. 
4. Erase Fault Codes after you repair the car to turn off the warning lights All Systems. 

Foxwell NT726 can diagnostic scan cars' all systems / sensors / modules, Including :
ABS System
SRS Airbag System
SAS System
TPMS System
IMMO System
Battery System
Suspension System
CHECK ENGINE / Engine Management: Emission System
DPF System
Air Conditioning System
Transmission System......
It can Read and erase codes on cars' all available systems, turn off MIL light (Indicator light), display live data in text, graph & analog for easy data review.
The tool will help you find why the warning lights are on, All systems diagnostic surely will help mechanics to improve efficiency.  
It will also help you find underlying problems, so you can solve them before causing serious issues or accidents, so car owners can drive more safely and happily, and save money by avoiding big bill on repair cars in garage.  
10 TEST MODES FOR THE CHECK ENGINE (Emission System)
● Read and Clear the fault codes, turn-off Malfunction Indicator Light (MIL)
● Displays Freeze Frame data
● Displays Oxygen Sensor test results
● Display I/M readiness status.(Non-continuously Monitored Systems test )
● Show Live Data in graph such as engine RPM, temperatures, ignition advance, speed & etc.
● Request On-Board Monitoring test results for specific monitored systems
● Built-in DTC lookup library with cause analysis
● Request Vehicle Information
● Checking system status & DTC Lookup
● Component test& Modules present

FOXWELL NT726 One Touch Upgrade Via WiFi, Lifetime Free Update!
Easily download software upgrades, simple operation, one-click connection to your car, solve almost all problems of your car!