This is a brand new pair of Hi/Low Beam Outer head light inserts. Yes 2 x lights and with GREEN LED Halo
The size is 5" x 7" rectangular and commonly referred to as ....
These are a generic rectangular light that fits a lot of vehicles. The only other generic size is 4x6 which is somewhat smaller. I sell these 4x6's also - refer to links below
The LED Halo rings are spectacular at night. Really bright and stand out a mile when the head lights are off - everyone loves them. During the day they are very good too.
Remember you have a 30 day satisfaction guarantee - if you find they aren't quite what you were after or need another size then just send them back for an exchange or refund.
You also have a 12 month warranty against any defects, rusting, fading - whatever.
They suit all of the following vehicles with rectangular lights ..
They are a direct replacement of your normal pair of hi and low beam lights and use your cars existing wiring loom. No mods and just a medium size phillips head screw driver is the only tool you need.
Fitting is dead easy. Remove the outer metal retainer (4 screws) and the light falls forward into your hands. Just unplug the old and plug in the new. Re-position the light and screw in the retainer and you are done. There is no need to remove the grill or headlight surrounds.
They dont come with provision for a park light globe.
The LED Halo rings have a red wire for 12v power and a black wire for earth. You can hook these up to your park light wires or run new wires to a manual switch on the dash. You have a few options there.
These are multi purpose hi and low beam lights. They will definitely out-perform the standard lights. The reflector is prismatic pressed metal and the glass is smooth. The reflector casts the light wide and downwards to the right in a kidney bean shape so as to not blind on coming cars. That's what makes them DOT / ADR compliant and legal on our roads in Australia. But when you hit high beam the light is higher and out to both sides. Note ADR's require that you still maintain your original park lights and not substitute your park lights for the LED rings.
They suit the 3 pin H4 globes (which I sell in this ebay store too). The globes are very easy to get should the need arise and have the same plug configuration as the factory sealed beam lights.
The great thing about semi sealed lights such as these and the use of H4 globes is that a) if you blow a globe you only have to change the globe and they are cheap. and b) you have a large choice of globe output wattage up to 100W low and 130W high. Sealed beams max out at only 65W - no wonder your factory lights aren't much chop.
Globes are not automatically included ..