Dual Output Non-Contact Potentiometer

5vdc Input

0.25 to 4.75vdc Output 1

4.75 to 0.25vdc Output 2

as used on PE Racing Pedal Box with FBW/DBW option

Mechanical Specifications

Mechanical travel 0° to +180° with stops

Frequency response 1,000Hz minimum

Rotational torque 0.025 – 0.110 N-m

Weight 35 grams (approx.)

Electrical Specifications

Mechanical input range 0° to +180°

Input voltage 5.0 V±0.25V DC

Input current 18mA maximum per output

36mA maximum total (both channels)

Sensor 0.25V – 4.75V for Analog at 5.0V input

5% – 95% duty cycle for PWM

Accuracy ±0.6% of full scale at room temperature

±0.9% of full scale over operating temperature range

Resolution Analog (continuous)

Output

This potentiometer has dual 0.25 Vdc to 4.5 Vdc ratiometric output from 5 Vdc excitation, refer data sheet.

Environmental Specifications

Electromagnetic compatibility 100V/meter, 14kHz – 1GHz range

Vibration 10G peak, 20 – 2,000 Hz

Shock 50Gs, half sine pulse, 5 m sec duration

Side load 1kg for 1 million cycles

Operating temperature range -40°C to +85°C

Storage temperature range -55°C to +105°C

Included:

One Dual Output Sensor #PE-002-3001

 6 Pin Connector & 7 Pins (allows one spare pin),

(Other items in photos are not included)

DATASHEET, SEE

 http://peracing.com.au/images/DBW-SENSOR-DATA-SHEET-V2.pdf

Ideal for Fly by Wire (Drive by Wire) of Throttle systems.

(Check that the sensor suits your application)

Ideal for Throttle control in Race Applications,

• Including Circuit Racing,
• Time Attack, Speedway,
• Rally (ON and OFF Road),
• Engine Conversions
• Drifting & Road Racing.

Also available

Linkages, Linkage Kits & Throttle Position Sensors (contact us)

For other sensors and accessories, Check our Other Items!