Dual Output Non-Contact Potentiometer

5vdc Input

0.25 to 4.75vdc Output 1

4.75 to 0.25vdc Output 2

as used on PE Racing Pedal Box with FBW/DBW option

Mechanical Specifications

Mechanical travel 0° to +180° with stops

Frequency response 1,000Hz minimum

Rotational torque 0.025 – 0.110 N-m

Weight 35 grams (approx.)

Electrical Specifications

Mechanical input range 0° to +180°

Input voltage 5.0 V±0.25V DC

Input current 18mA maximum per output

36mA maximum total (both channels)

Sensor 0.25V – 4.75V for Analog at 5.0V input

5% – 95% duty cycle for PWM

Accuracy ±0.6% of full scale at room temperature

±0.9% of full scale over operating temperature range

Resolution Analog (continuous)

Output

This potentiometer has dual 0.25 Vdc to 4.5 Vdc ratiometric output from 5 Vdc excitation, refer data sheet.

Environmental Specifications

Electromagnetic compatibility 100V/meter, 14kHz – 1GHz range

Vibration 10G peak, 20 – 2,000 Hz

Shock 50Gs, half sine pulse, 5 m sec duration

Side load 1kg for 1 million cycles

Operating temperature range -40°C to +85°C

Storage temperature range -55°C to +105°C

Included:

One Dual Output Sensor #PE-002-3001

 6 Pin Connector & 7 Pins (allows one spare pin),

(Other items in photos are not included)

Ideal for Fly by Wire (Drive by Wire) of Throttle systems.

(Check that the sensor suits your application)

Ideal for Throttle control in Race Applications,

• Including Circuit Racing,
• Time Attack, Speedway,
• Rally (ON and OFF Road),
• Engine Conversions
• Drifting & Road Racing.

Also available

Linkages, Linkage Kits & Throttle Position Sensors (contact us)

For other sensors and accessories, Check our Other Items!