This is a Brand New Factory Packed   "A  STYLE"  1"   COVERSTITCH BINDER for the BROTHER B272 INDUSTRIAL MACHINE

The CUT SIZE of the tape BEFORE entering the folder is   1"    The FINISH SIZE of the tape AFTER Folding in Half and Underfolding the Top is   5/16"

The Tape is folded TWICE on the TOP (Clean Finish) and NOT FOLDED on the BOTTOM (Raw Finish). This is the   "A STYLE"   standard "Collarette" Folder used on all kinds of T-shirts and Tops, especially Knitwear. There are two adjustable edge guides screwed onto this world class binder. One sliding guide sets the top edge of the fabric and the other sliding guide sets the bottom fabric edge giving the operator total control over the configuration of the binding. This binder sets perfectly folded binding onto the Collars, Armholes, and Bottoms of Knit Tops.

This binder screws onto the bed of MOST FLATBED COVERSTITCH Machines made by:

ARTISAN    BABYLOCK    BROTHER    FEIYUE    JUKI    KANSAI    PEGASUS    SIRUBA    TAIKO    UNION SPECIAL    WILLCOX & GIBBS    YAMATO

And like most Folders & Binders, a mechanic can mount these Binders onto just about anything.

This "A" Style Coverstitch BINDER is available in these sizes.

****  CUT SIZE  /  FINISH SIZE CHART  ****

CUT               FINISH

1"         5/16"
1-1/8"     3/8"
1-1/4"     7/16"
1-3/8"     1/2"
1-1/2"     9/16"
1-9/16"    9/16"
1-3/4"     11/16"
1-7/8"     3/4"
2"         3/4"
2-3/16"    7/8"
2-3/8"     1"
2-3/4"     1-1/8"
3"         1-1/4"
3-1/2"     1-1/2"

These Binders will fit Many Machines including the following:

ARTISAN:  VC-3500    ZJW-122

BABYLOCK:  BLCS

BROTHER:  2340CV    B257    B271    B272    B277

FEIYUE:  FY007    GK-31016

GEMSY:  500B-01    RXM-77

JUKI:  MF-890    MF-7722    MF-7723    MO-735

KANSAI:  V803F    W803F    DWK-1803F    W8103F

MORITA:  YS-157

PEGASUS:  W41    W61    W62    W63    W542    W562    WS42    WS62    WS64    WT562

SINGER: QUANTUMLOCK 14T957DC

SIRUBA:  F007

TAIKO:  TK800F

UNION SPECIAL:  52700    52800    FS300

WILLCOX & GIBBS:  W41    W61    W62    W63    W542    W562    WS42    WS62    WS64    WT562

YAMATA:  GK257    GK357

YAMATO:  DW1259    DW1359    VF2400    VF2500

ZOJE:    W562

We also have   "B STYLE"    Coverstitch Folders. These are Double Fold on BOTH TOP and BOTTOM.

THE BINDING:    Take a look at your pre-cut roll of bias binding tape or a strip of your proposed binding fabric. There are 2 very important aspects of Binding:

1) Pull on boths ends of a 6" to 8" section of binding. Does it get very narrow when you pull? The best functioning binding will NOT get much narrower when pulled slightly. It will stay close to the same width. If it does get TOO narrow it may cause either the top or bottom of the finished binding to "roll out".

2) Pull on boths ends of a 6" to 8" section of binding. Do the edges roll ? Too much rolling of the edges can mean trouble. And even worse, if there is a "FACE" or "Right Side" to the binding fabric, check to see if the rolling edges are rolling with the "FACE" out. If the natural roll is "FACE" in then the Binder must fold the binding against it's natural roll.

If you have Binding that gets narrow when pulled and also rolls considerably and is rolling "FACE" in , these binders likely will not work properly .

These Binders are sold by the machine manufacturers in a few Standard sizes for $99.00 each.

If your size is not available, these binders cost $150.00 each to be custom made.