TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING AS DESCRIBED
The unit has been reset to the factory default settings. See console log below. Please note unit is missing the front bezel, however it does not affect the performance of the unit (see photos for detail).

COMPONENTS INCLUDED IN THIS AUCTION:

• (1) - RIVERBED STEELHEAD 1050 SHA-01050-H APPLICATION ACCELERATOR SERVER RB999-00100-03 A RB100-00100-03 M CLASS:HIGH 1UABA
• (1) - INTEL XEON CPU E5205 DUAL-CORE 1.86GHZ PROCESSOR
• (2) - 2GB RAM (4GB TOTAL)
• (2) - WD WD2502ABYS 250GB SATA HARD DRIVE
• (4) - HARD DRIVE CADDY
• (2) - DPS-65550JB B POWER SUPPLY 650W
• (2) - POWER CORD

REPLACEMENT GUARANTEE - ITEM IS GUARANTEED WORKING AS DESCRIBED:

Please see our test notes above for further information. Our descriptions, and photos represent our best effort to relay all pertinent information about a product. We assure the buyer that they will receive an item with the level of operation shown in the photos and described in our Test and Cosmetic notes. When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. We do not refund the shipping charges because we are unable to recoup these costs.

ADDITIONAL INFORMATION:

The following is the Console Log from this item:
AMIBIOS(C)2006 American Megatrends, Inc.
BIOS Date: 05/18/09 14:30:53 Ver: 08.00.14
1U: Riverbed Barramundi BIOS V1.10
CPU : Intel(R) Xeon(R) CPU E5205 @ 1.86GHz
Speed : 1.86 GHz ,Dram Clocking = 667MHz

Riverbed Technology, Inc.


Press any key to continue.

GNU GRUB version 0.95 (635K lower / 3668736K upper memory)

-------------------------------------------------------------------
0: Riverbed Steelhead Software v. 7.0.4 (64bit)
1: Riverbed Steelhead Software v. 8.0.3a (64bit)
-------------------------------------------------------------------

Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, 'a' to modify the kernel arguments
before booting, or 'c' for a command-line.

Entry 1 will be booted automatically in 1 seconds.
Booting 'Riverbed Steelhead Software v. 8.0.3a (64bit)'

root (hd0,2)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz ro root=LABEL=ROOT_2 nmi_watchdog=0 crashkernel=40M console=tty
0 console=ttyS0,9600n8
[Linux-bzImage, setup=0x3200, size=0x4a0ff0]
initrd /rbt-initrd.img
[Linux-initrd @ 0x3744e000, 0xba13e4 bytes]

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32 (rootATedinburgh.lab.nbttech.com) (gcc driver version 4.4.6
20110731 (Red Hat 4.4.6-3) (GCC) executing gcc version 4.4.5) #1 SMP Mon Jul 15
15:59:58 PDT 2013
Command line: ro root=LABEL=ROOT_2 nmi_watchdog=0 crashkernel=40M console=tty0 c
onsole=ttyS0,9600n8
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dffc0000 (usable)
BIOS-e820: 00000000dffc0000 - 00000000dffce000 (ACPI data)
BIOS-e820: 00000000dffce000 - 00000000dffe0000 (ACPI NVS)
BIOS-e820: 00000000dffe0000 - 00000000dffee000 (reserved)
BIOS-e820: 00000000dfff0000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
DMI present.
SMBIOS version 2.5 @ 0xFA680
last_pfn = 0x120000 max_arch_pfn = 0x400000000
total RAM covered: 4096M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
last_pfn = 0xdffc0 max_arch_pfn = 0x400000000
init_memory_mapping: 0000000000000000-00000000dffc0000
init_memory_mapping: 0000000100000000-0000000120000000
RAMDISK: 3744e000 - 37fef3e4
ACPI: RSDP 00000000000f9960 00024 (v02 ACPIAM)
ACPI: XSDT 00000000dffc0100 0004C (v01 051809 XSDT1430 20090518 MSFT 00000097)
ACPI: FACP 00000000dffc0290 000F4 (v04 051809 FACP1430 20090518 MSFT 00000097)
ACPI: DSDT 00000000dffc04c0 05146 (v02 0AAAA 0AAAA000 00000000 INTL 20051117)
ACPI: FACS 00000000dffce000 00040
ACPI: APIC 00000000dffc0390 00092 (v02 051809 APIC1430 20090518 MSFT 00000097)
ACPI: SPCR 00000000dffc0430 00050 (v01 051809 SPCR1430 20090518 MSFT 00000097)
ACPI: MCFG 00000000dffc0480 0003C (v01 051809 OEMMCFG 20090518 MSFT 00000097)
ACPI: OEMB 00000000dffce040 00071 (v01 051809 OEMB1430 20090518 MSFT 00000097)
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Bootmem setup node 0 0000000000000000-0000000120000000
NODE_DATA [0000000000015000 - 0000000000048fff]
bootmap [0000000000049000 - 000000000006cfff] pages 24
(8 early reservations) ==> bootmem [0000000000 - 0120000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000219ce34] TEXT DATA BSS ==> [0001000000 - 000219ce34]
#3 [003744e000 - 0037fef3e4] RAMDISK ==> [003744e000 - 0037fef3e4]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#5 [000219d000 - 000219d214] BRK ==> [000219d000 - 000219d214]
#6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
found SMP MP-table at [ffff8800000ff780] ff780
Reserving 40MB of memory at 48MB for crashkernel (System RAM: 4608MB)
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00120000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000dffc0
0: 0x00100000 -> 0x00120000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 8 CPUs, 6 hotplug CPUs
Allocating PCI resources starting at f0000000 (gap: f0000000:ee00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91992 r8192 d22696 u262144
pcpu-alloc: s91992 r8192 d22696 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032165
Policy zone: Normal
Kernel command line: ro root=LABEL=ROOT_2 nmi_watchdog=0 crashkernel=40M console
=tty0 console=ttyS0,9600n8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
AMD-Vi disabled by default: pass amd_iommu=on to enable
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3995788k/4718592k available (6551k kernel code, 525000k absent, 197804k
reserved, 7891k data, 1112k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
console [condump0] enabled
console [ttyS0] enabled
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0xdfffffff could not be reserved
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11908k freed
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Slow work thread pool: Starting up
Slow work thread pool: Ready
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 7827
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Non-volatile memory driver v1.3
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
megasas: 00.00.06.14-rh1 Fri. Jan. 6 17:00:00 PDT 2012
mpt2sas version 08.101.00.00 loaded
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems s
xs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 33
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 33
ata3: SATA max UDMA/133 abar m2048@0xfdfff800 port 0xfdfffa00 irq 33
ata4: SATA max UDMA/133 abar m2048@0xfdfff800 port 0xfdfffa80 irq 33
ata5: SATA max UDMA/133 abar m2048@0xfdfff800 port 0xfdfffb00 irq 33
ata6: SATA max UDMA/133 abar m2048@0xfdfff800 port 0xfdfffb80 irq 33
Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-1-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
e1000e 0000:0a:00.0: Disabling ASPM L1
e1000e 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:0a:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:0e:b6:91:31:41
e1000e 0000:0a:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:0a:00.0: eth0: MAC: 0, PHY: 4, PBA No: C83246-002
e1000e 0000:0a:00.1: Disabling ASPM L1
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
e1000e 0000:0a:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata1.00: ATA-8: WDC WD2502ABYS-01B7A0, 02.03B02, max UDMA/133
e1000e 0000:0a:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:0e:b6:91:31:40
e1000e 0000:0a:00.1: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:0a:00.1: eth1: MAC: 0, PHY: 4, PBA No: C83246-002
e1000e 0000:09:00.0: Disabling ASPM L1
e1000e 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:09:00.0: eth2: (PCI Express:2.5GB/s:Width x4) 00:0e:b6:91:31:3f
e1000e 0000:09:00.0: eth2: Intel(R) PRO/1000 Network Connection
e1000e 0000:09:00.0: eth2: MAC: 0, PHY: 4, PBA No: C83246-002
e1000e 0000:09:00.1: Disabling ASPM L1
e1000e 0000:09:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:09:00.1: eth3: (PCI Express:2.5GB/s:Width x4) 00:0e:b6:91:31:3e
e1000e 0000:09:00.1: eth3: Intel(R) PRO/1000 Network Connection
e1000e 0000:09:00.1: eth3: MAC: 0, PHY: 4, PBA No: C83246-002
e1000e 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
0000:03:00.0: con_dump_register: page size=32, npages=64, first page=192, word_s
ize=4096
e1000e 0000:03:00.0: Disabling ASPM L0s
e1000e 0000:03:00.0: (unregistered net_device): WOL enabled, not powering down p
hy.
e1000e 0000:03:00.0: eth4: (PCI Express:2.5GB/s:Width x1) 00:0e:b6:33:30:39
e1000e 0000:03:00.0: eth4: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0: eth4: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:02:00.0: Disabling ASPM L0s
e1000e 0000:02:00.0: (unregistered net_device): WOL enabled, not powering down p
hy.
e1000e 0000:02:00.0: eth5: (PCI Express:2.5GB/s:Width x1) 00:0e:b6:33:30:38
e1000e 0000:02:00.0: eth5: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0: eth5: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2
Copyright (c) 2007-2011 Intel Corporation.
pcnet32.c:v1.35 21.Apr.2008 tsbogendATalpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Fusion MPT base driver 4.28.00.00
Copyright (c) 1999-2010 LSI Corporation
Fusion MPT SPI Host driver 4.28.00.00
Fusion MPT SAS Host driver 4.28.00.00
Fusion MPT misc device (ioctl) driver 4.28.00.00
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffec00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
ata1.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e400
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e480
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: No PS/2 controller found. Probing ports directly.
usb 2-5: new high speed USB device using ehci_hcd and address 2
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP bic registered
TCP cubic registered
TCP westwood registered
ata1.00: configured for UDMA/133
TCP skipware_pc registered
scsi 0:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 490350672 512-byte logical blocks: (251 GB/233 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
TCP skipware_et registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP veno registered
TCP scalable registered
TCP lp registered
TCP yeah registered
TCP illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
usb 2-5: New USB device found, idVendor=14af, idProduct=af01
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: ATP USB DOM
usb 2-5: Manufacturer: ATP Electronics
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2017-01-12 14:52:17 UTC (1484232737)
usb 2-5: SerialNumber: 9901509020700996
Initalizing network drop monitor service
usb 2-5: configuration #1 chosen from 1 choice
sda: sda1 sda2
scsi6 : SCSI emulation for USB Mass Storage devices
sda3 sda4 < sda5="" sda6="">
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD2502ABYS-01B7A0, 02.03B02, max UDMA/133
ata2.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 490350672 512-byte logical blocks: (251 GB/233 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdb:
scsi 6:0:0:0: Direct-Access ATP USB DOM 1100 PQ: 0 ANSI: 0 CCS

sdb1 sdb2 sdb3 sdb4 <>
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 4014080 512-byte logical blocks: (2.05 GB/1.91 GiB)
ata3: SATA link down (SStatus 0 SControl 300)
sdb6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5="" sdc6="" sdc7="">
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 1112k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1620k freed
Freeing unused kernel memory: 1380k freed
udev: starting version 147
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
EDAC MC: Ver: 2.1.0 Jul 15 2013
EDAC MC0: Giving out device to 'i5100_edac.c' 'i5100': DEV 0000:00:10.1
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Waiting for root device
Root label found ROOT_2
sha:Insmod of shadow sha1.ko successful
sha2 sha3 sha4 < sha5="" sha6="" sha7="">
EXT3-fs (sha3): using internal journal
EXT3-fs (sha3): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sha1): using internal journal
EXT3-fs (sha1): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sha7): using internal journal
EXT3-fs (sha7): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda3): using internal journal
EXT3-fs (sda3): mounted filesystem with ordered data mode
mount: none already mounted or /dev/pts busy
mount: according to mtab, devpts is already mounted on /dev/pts
[FAILED]
Enabling /etc/fstab swaps: Adding 2104504k swap on /dev/sda2. Priority:-1 exte
nts:1 across:2104504k
[ OK ]
shadow driver loaded
sha found
sha backing device attached
sha shadow device not attached
sha nsectors=4014080 nk=2007040 npages=501760
sha: /var/sha/store already exists; reuse it
mapping config.img to /dev/loop1
mounting /config on /dev/loop1
kjournald starting. Commit interval 5 seconds
EXT3-fs (loop1): using internal journal
EXT3-fs (loop1): recovery complete
EXT3-fs (loop1): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sha7): using internal journal
EXT3-fs (sha7): mounted filesystem with ordered data mode
Starting shadow prepopulation

real 1m8.318s
user 0m0.001s
sys 0m2.734s
Shadow prepopulation complete
EXT3-fs (sha6): warning: maximal mount count reached, running e2fsck is recommen
ded
EXT3-fs (sha6): using internal journal
Flash configuration ok
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave a
ddress 0x20, irq 0
smi_start_processing: ipmi_si: started SI helper thread
ipmi: Found new BMC (man_id: 0x0019fd, prod_id: 0x19e7, dev_id: 0x20)
IPMI kcs interface initialized
ipmi device interface
IPMI FW and SDR are up to date for this appliance
Checking virtualization bit and fan mode
0x97 already set
0x90 already set
0x90 already set
Skipping Firmware Checks!
Entering non-interactive startup
iptables: Applying firewall rules: [ OK ]
Starting system logger: [ OK ]
Starting irqbalance: [ OK ]
MOBO base revision 400-00100
ro root=LABEL=ROOT_2 nmi_watchdog=0 crashkernel=40M console=tty0 console=ttyS0,9
600n8
Cannot set new wake-on-lan settings: Operation not supported
not setting wol
Cannot set new wake-on-lan settings: Operation not supported
not setting wol
net.ipv4.ip_local_port_range = 8000 63000
ipmi_sdr_maj_ver=6631
ipmi_sdr_min_ver=12
Temperature logging started.
Checking for unexpected shutdown
Detected unexpected shutdown!shadow driver loaded
sha found
sha backing device attached
Shutting down system logger: [ OK ]
Starting system logger: [ OK ]
Shutting down system logger: [ OK ]
Starting system logger: [ OK ]
Shutting down system logger: [ OK ]
Starting system logger: [ OK ]
Checking for kernel-crashdumps [if any]. This may take some time. Please wait...

Executing rsisinit: Starting pm: [ OK ]
Starting net-linkreset.shStarting mcelog daemon
Starting softwatch:
Starting oom_profile:
Starting softwatch:

Riverbed Steelhead
amnesiac login: admin
Password:
Last login: Thu Jan 12 14:38:29 on ttyS0

Riverbed Steelhead configuration wizard.

Do you want to auto-configure using a CMC?