24mm Extension

• 24mm Extension for splitters or solenoids.
• Female-Female 1/8" NPT thread.
• Silver Brass, very strong and durable.
• 4 x O-rings supplied to ensure good seal.
• Connect solenoid to regulator or connect splitter to regulator.

This 24mm extension adapter can be used to connect a solenoid valve to a regulator, or to connect a CO2 splitter to a regulator.

<strong>Use with CO2 Regulator Splitter</strong>

An extension is often needed for splitters because the size of the splitter unit and needle valves often mean it impedes on the regulator or pressure gauges.  An extension is used to move the splitter away from the regulator components so it is free of any impediment.

<strong>Use with CO2 Solenoid</strong>

It is not sufficient to use tubing (even Polyurethane) to connect a solenoid to a regulator because the pressure build-up will cause the tubing to fail (explode). Because this extension is made from metal, it can withstand the pressure and ensure trouble-free use.