The ARCTIC P12 Pro A-RGB White 120mm PWM Fan - 3 Pack is a set of three addressable RGB case fans suited to builders who want quiet, efficient airflow with daisy-chainable PWM and A-RGB control. Each fan uses a Fluid Dynamic Bearing and a redesigned rotor blade profile to balance performance against low noise, and a zero-RPM stop-below-5%-PWM mode keeps the system silent during light loads. The 3-pack ships with daisy-chain PWM and A-RGB connectors so all three fans can be synchronized from a single motherboard header.
Why This Product
-
Zero-RPM mode for silent light loads
— The fan stops completely when PWM signal drops below 5%, so your system runs in total silence whenever cooling demand is low.
-
Wide speed range via PWM
— Speed adjusts progressively from 600 rpm up to 3000 rpm through the standard 4-pin PWM connection, giving the system fine-grained control over airflow and noise.
-
Daisy-chain PWM and A-RGB in series
— An additional PWM connector and 3-pin A-RGB socket on each fan let you link all three — and more — from a single motherboard header without hubs or splitters.
-
Fluid Dynamic Bearing for long service life
— The self-lubricating FDB minimizes friction and noise over time, contributing to ARCTIC's confidence in offering a 6-year warranty on the product.
-
Redesigned blades balance airflow and quiet
— The updated rotor geometry is tuned to deliver strong airflow — 77 cfm / 131 m³/h — and 6.9 mmH2O static pressure while staying efficient at low speeds.
-
6-year warranty backed by ARCTIC
— Every unit in the pack is covered for six years, reflecting the testing standards ARCTIC applies before products reach market.
At a Glance
|
Fan size
|
120 mm
|
|
Speed range
|
600-3000 rpm (0 rpm below 5% PWM)
|
|
Airflow
|
77 cfm / 131 m³/h
|
|
Static pressure
|
6.9 mmH2O
|
|
Connector
|
4-Pin PWM + 4-Pin socket (daisy-chain)
|
|
A-RGB
|
3-Pin A-RGB + 3-Pin socket, 12 LEDs per fan
|
|
Warranty
|
6 years
|
|
Pack quantity
|
3 fans
|
Compatibility
-
✓ Fits any standard 120 mm fan mount on cases, radiators and heatsinks.
-
✓ Works with any motherboard or controller that provides a 4-pin PWM fan header at 12 V DC.
-
✓ A-RGB lighting connects to any 3-pin 5 V A-RGB header for addressable control.
-
Note: Daisy-chain PWM sync requires the upstream header to supply enough current for all connected fans; verify your motherboard's fan header current rating before chaining many fans.
-
✗ Not compatible with 3-pin voltage-controlled headers for speed control — PWM (4-pin) is required to use the full speed range and zero-RPM mode.
-
✗ Not compatible with non-addressable (12 V 4-pin) RGB headers — the A-RGB connector is 3-pin 5 V only.
Best For / Trade-offs
Best for:
-
Quiet, low-load systems
— the zero-RPM stop mode means the fans contribute no noise at all during light workloads.
-
Builders managing cable clutter
— the daisy-chain PWM and A-RGB connectors let three or more fans run from a single header each.
-
White-themed builds with A-RGB lighting
— white fan frames and 12 individually addressable LEDs per fan suit aesthetics-focused builds.
-
Long-term reliability focus
— the Fluid Dynamic Bearing and 6-year warranty make it a low-maintenance choice for systems that run continuously.
-
Radiator and high-resistance airflow paths
— 6.9 mmH2O static pressure is well-suited to pushing air through radiator fins.
Trade-offs:
-
Systems with only 3-pin voltage-controlled headers
— without a 4-pin PWM header, the full speed range and zero-RPM mode cannot be used.
-
Non-addressable RGB ecosystems
— the 3-pin 5 V A-RGB connector is incompatible with standard 4-pin 12 V RGB headers.
-
Buyers who need only one fan
— this product is sold exclusively as a 3-pack; individual units are not included as a separate SKU here.
Description
An additional PWM connector allows multiple fans to be synchronized in series using a single header.
Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
Specifications
General
|
Brand
|
ARCTIC
|
|
Model
|
P12 Pro A-RGB White 3-Pack
|
|
Pack quantity
|
3 fans
|
|
Warranty
|
6 Years
|
|
EAN
|
4895265000683
|
|
UPC
|
840033403351
|
Fan
|
Size
|
120 mm
|
|
Fan bearing
|
Fluid Dynamic Bearing (FDB)
|
|
Connector
|
4-Pin Fan Plug + 4-Pin Socket
|
|
Cable length
|
400 mm + 80 mm daisy-chain cable
|
|
LEDs
|
12x A-RGB LEDs per fan
|
|
RGB connector
|
3-Pin A-RGB Plug + 3-Pin Socket
|
Performance
|
Speed range
|
600-3000 rpm, PWM controlled; 0 rpm below 5% PWM
|
|
Airflow
|
77 cfm / 131 m³/h
|
|
Static pressure
|
6.9 mmH2O
|
|
Typical voltage
|
12 V DC
|
|
Start-up voltage
|
3.3 V DC
|
|
Current (fan)
|
0.33 A
|
Acoustics & power
|
RGB voltage
|
5 V DC
|
|
RGB current
|
0.40 A
|
|
Zero-RPM mode
|
Yes — fan stops completely below 5% PWM
|