The electric leather stripping machine is specially designed for leather processing. It stretches and sets the shape of leather materials to improve the leather quality and production efficiency. It is driven by a high-quality electric motor, has an overload protection function, and can meet different leather processing requirements.

Parameters:

Voltage: 110V 60Hz
Motor Power: 179W
Motor Speed: 1800 rpm
Specification: 300mm (11.81in)
Roller Diameter: 58mm (2.28in)
Pressing Material Thickness: 0.8-1.0mm (0.03-0.04 inch)
Size of Drawing Tubes:
1. Inlet: 12mm (0.47in), Outlet: 6mm (0.24in)
2. Inlet: 14mm (0.55in), Outlet: 7mm (0.27in)
Packing dimension: 52*34*42cm (20.47*13.39*16.54 inches)
Net weight/Gross weight: 19.75kg (43.54lb)/21.05kg (46.41lb)

Features:

Control Panel
The reasonable control panel is designed for simple operation. The ammeter can clearly display the current in real time to ensure easy and safe operation. The speed knob allows speed regulation according to the actual demands.

Upper and lower roller feeding system
The leather is rapidly fed and tightly pressed by the upper and lower rollers, no gap is generated, and the uniform strip pressing effect can be achieved. The machine is suitable for strip drawing and pressing operation for leather and non-woven fabrics.

Adjustable roller screw mechanism
The pressing wheel adopts the adjustable screw structure. The pressing force can be adjusted flexibly according to the actual processing requirements, and the practicability and adaptability are well enhanced.

Drawing Tubes
The user-friendly mounting plate design supports installation of two different stripping tubes. The material thickness is adjustable, the working efficiency is greatly improved, and different leather drawing demands can be well met.

PVC Transparent Protective Cover
The clear protective shield is used for direct visual observation, and can well protect operators from accidents and injuries, and the practicability and safety can be well ensured.

Lifting Handles
The ergonomic handles are designed on the two sides of the machine shell, facilitating movement and carrying before operation and after use, ensuring good safety and practicability and avoiding accidents.

Operation Method:

1. Place the leather material onto the stripping machine and adjust the position to ensure the leather fits fully against the machine surface.
2. Turn on the power switch, and the power indicator will be on.
3. Start the stripping machine and gradually increase the power output for better contact between the leather and the machine surface.
4. Once the required dimension is achieved, turn off the power switch and take out the leather material.

Precaution:

1. Do not operate the machine in the humid environments.
2. Do not overload the machine to prevent equipment damage.
3. Check that the machine is placed stably before use to avoid shifting or tipping caused by uneven floors.
4. Do not perform maintenance or cleaning before the machine comes to a complete stop.
5. Obvious noise and vibration are normal during machine operation. Do not work for extended periods under the conditions of such noise and vibration to avoid adverse health effects.
6. In case of hazards or malfunctions during operation, cut off the power supply immediately and contact maintenance personnel to prevent safety accidents and property losses.

Item Included:

Electric Leather Stripping Machine 110V (238065)