Upgrade your lighting setup with this automatic PIR motion sensor switch, designed to turn connected lights on when movement is detected and switch them off automatically after a preset period of inactivity.
With adjustable light sensitivity (LUX) and timer settings, this wall-mounted infrared sensor provides convenient, hands-free lighting while helping reduce unnecessary energy use. Its adjustable 180° rotation makes it easier to position the detection area where needed.
Automatic Motion Detection – Activates connected lights when movement is detected.
Adjustable Shut-Off Timer – Set the lighting duration from approximately 5 seconds to 6 minutes.
Adjustable LUX Sensitivity – Light threshold can be adjusted from approximately 2–2000 lux.
Wide Voltage Range – Designed for systems using AC 85–265V, including 110V and 220V AC applications, as well as 12V DC systems.
PIR Infrared Technology – Detects movement using passive infrared sensing.
180° Adjustable Rotation – Allows flexible positioning after installation.
Wall-Mounted Design – Suitable for mounting on walls and other appropriate surfaces.
Indoor & Outdoor Applications – Suitable for a variety of lighting and security applications when installed in an appropriate location.
Detection Distance – Detects movement from approximately 12 metres, depending on installation conditions.
Suitable for automatic lighting in:
Hallways and staircases
Garages and parking areas
Gardens and outdoor spaces
Entrances and pathways
Security lighting
Utility rooms and storage areas
Other areas where automatic lighting is required
| Specification | Details |
|---|---|
| Product Type | PIR Motion Sensor Switch |
| Sensor Type | Passive Infrared (PIR) |
| Material | ABS |
| Body Colours | Grey, Black, White |
| Voltage | AC 85–265V / 110V AC / 220V AC / 12V DC |
| Rotation | 180° |
| Detection Distance | Approx. 12 m |
| Recommended Installation Height | Approx. 1.5–2.5 m |
| LUX Adjustment | Approx. 2–2000 lux |
| Timer Adjustment | Approx. 5 seconds–6 minutes |
| Installation | Wall Mounted |
| Intended Use | Automatic Light Control |
| Standards Listed | LVD, EMC, CE, RoHS |
Install and connect the sensor according to the applicable wiring requirements.
Adjust the sensor position to cover the desired detection area.
Set the LUX control according to the ambient light level at which you want the sensor to operate.
Adjust the time setting to determine how long the light remains on after motion is detected.
When movement is detected within the sensing range, the connected light switches on automatically and turns off after the preset delay when no further movement is detected.
1 × PIR Motion Sensor Switch
Electrical installation should be carried out by a suitably qualified person. Always confirm the sensor's voltage, wiring configuration, and load compatibility before installation. Actual detection range and performance can vary depending on mounting height, temperature, surroundings, and installation conditions.