• Description:
    • 100% Brand new,never been used
    • This intake manifold offers greater air flow potential
    • Item Type: Intake Manifold
    • Material: Cast Aluminum
    • Finish: Natural
    • Intake Style: Hi-Ram
    • Throttle Body Bore Size: 92mm
    • Intake Manifold Height: Front/Rear Height 12.32 in
    • Fuel Injection Style: Multi-port
    • Engine Block Deck Height: Standard deck
    • Basic Operating RPM Range: 3500-8000 RPM
    • Part Number: 300-116,300116
    • Cylinder Head Configuration: Rectangular Port LS3/L76/L92/L99
    • Fitment Type: Direct Replacement
    • Professional installation in highly recommended(No instruction included)
     
  • Specification:
  • Ssnpower718

    Best choice of motor parts

    EFI Hi-Ram Multi-Port 92mm Intake Manifold 300-116 For Chevy GM LS L92 LS3 V8

    Description:

    • 100% Brand new,never been used
    • This intake manifold offers greater air flow potential
    • Item Type: Intake Manifold
    • Material: Cast Aluminum
    • Finish: Natural
    • Intake Style: Hi-Ram
    • Throttle Body Bore Size: 92mm
    • Intake Manifold Height: Front/Rear Height 12.32 in
    • Fuel Injection Style: Multi-port
    • Engine Block Deck Height: Standard deck
    • Basic Operating RPM Range: 3500-8000 RPM
    • Part Number: 300-116,300116
    • Cylinder Head Configuration: Rectangular Port LS3/L76/L92/L99
    • Fitment Type: Direct Replacement
    • Professional installation in highly recommended(No instruction included)

     

    Specification:

    • EFI LS hi-ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. these hi-ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system.
    • These hi-ram style intake manifolds are designed for high performance engine applications up to 427-440 cubic inch displacement and maximum engine speeds of 7500-8500 rpm, depending on the engine combination. The Hi-Ram intake manifolds are intended for maximum performance applications and will not accept stock components and hardware.
    • The EFI versions of the LS hi-ram intake manifold and fuel rail are designed to accept EV-1 or pico fuel injectors.

     

    Fitment:

    • Fits for Cadillac Models:
      For Cadillac Escalade 2007-2008
      For Cadillac Escalade ESV 2007-2008
      For Cadillac Escalade EXT 2007-2008
       

    • Fits for Chevrolet Models:
      For Chevrolet Camaro 2010-2015
      For Chevrolet Corvette 2008-2013
      For Chevrolet SS 2014-2017
      For Chevrolet Tahoe 2008-2008

       

    • Fits for GMC Models:
      For GMC Sierra 1500 2007-2008
      For GMC Yukon 2007-2008
      For GMC Yukon XL 1500 2007-2008
       

    • Fit for Hummer Models:
      For H2 2008

       

    • Fits for Pontiac Models:
      For Pontiac G8 2009-2009

     

    Package Includes:

    • 1x Intake Manifold
    • 1x Fuel Rail kit
    • Mounting Hardware
    • As the pictures show

     

    Notes:

    • OE LS fuel injectors may not fit properly in the hi-ram EFI intake manifold fuel rail assembly.You need to purchase the bracket separately. A modified hood will be required for most vehicle applications.
    • Longitudinal plenum top with fuel rails machined for -8 AN O-ring fittings
    • Please Check the Compatibility Carefully before Placing an Order.

    Item Specifics
    Brand ssnpower718
    Material Aluminum
    Type Intake Manifold
    Fitment For Cadillac, Chevrolet, GMC, Hummer, Pontiac
    Fitment Type Direct Replacement
    Throttle Body Bore Size 92mm
    Interchange Part Number 300-116
    Manufacturer Part Number 300-116
    RPM Range 7000-8000 RPM
    Engine V8 6.0L 6.2L
    Finish Natural

    Payment

    All major credit cards are accepted through secure payment processor Ebay payment.Payment must be received within 7 business days of auction closing.

    Shipping

    We usually ship within 1-3 business days(Monday- Friday)after receiving cleared payment.

    The orders of Friday would be shiped in the next Monday.

    We will ship our product from United States, and it may takes about 3 to 10 business days to arrive your place.

    Returns

    Change-of-mind return can only be accepted within 7 days after purchase.

    All other returns can be accepted in 30 days.

    Contact Us

    And our Office is closed on weekends and public holidays.

    We apologize for the late reply during the holidays.

    Ssnpower718

    Best choice of motor parts

    EFI Hi-Ram Multi-Port 92mm Intake Manifold 300-116 For Chevy GM LS L92 LS3 V8

    Description:

    • 100% Brand new,never been used
    • This intake manifold offers greater air flow potential
    • Item Type: Intake Manifold
    • Material: Cast Aluminum
    • Finish: Natural
    • Intake Style: Hi-Ram
    • Throttle Body Bore Size: 92mm
    • Intake Manifold Height: Front/Rear Height 12.32 in
    • Fuel Injection Style: Multi-port
    • Engine Block Deck Height: Standard deck
    • Basic Operating RPM Range: 3500-8000 RPM
    • Part Number: 300-116,300116
    • Cylinder Head Configuration: Rectangular Port LS3/L76/L92/L99
    • Fitment Type: Direct Replacement
    • Professional installation in highly recommended(No instruction included)

     

    Specification:

    • EFI LS hi-ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. these hi-ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system.
    • These hi-ram style intake manifolds are designed for high performance engine applications up to 427-440 cubic inch displacement and maximum engine speeds of 7500-8500 rpm, depending on the engine combination. The Hi-Ram intake manifolds are intended for maximum performance applications and will not accept stock components and hardware.
    • The EFI versions of the LS hi-ram intake manifold and fuel rail are designed to accept EV-1 or pico fuel injectors.

     

    Fitment:

    • Fits for Cadillac Models:
      For Cadillac Escalade 2007-2008
      For Cadillac Escalade ESV 2007-2008
      For Cadillac Escalade EXT 2007-2008
       

    • Fits for Chevrolet Models:
      For Chevrolet Camaro 2010-2015
      For Chevrolet Corvette 2008-2013
      For Chevrolet SS 2014-2017
      For Chevrolet Tahoe 2008-2008

       

    • Fits for GMC Models:
      For GMC Sierra 1500 2007-2008
      For GMC Yukon 2007-2008
      For GMC Yukon XL 1500 2007-2008
       

    • Fit for Hummer Models:
      For H2 2008

       

    • Fits for Pontiac Models:
      For Pontiac G8 2009-2009

     

    Package Includes:

    • 1x Intake Manifold
    • 1x Fuel Rail kit
    • Mounting Hardware
    • As the pictures show

     

    Notes:

    • OE LS fuel injectors may not fit properly in the hi-ram EFI intake manifold fuel rail assembly.You need to purchase the bracket separately. A modified hood will be required for most vehicle applications.
    • Longitudinal plenum top with fuel rails machined for -8 AN O-ring fittings
    • Please Check the Compatibility Carefully before Placing an Order.
    Item Specifics
    Brand :ssnpower718
    Material :Aluminum
    Type :Intake Manifold
    Fitment :For Cadillac, Chevrolet, GMC, Hummer, Pontiac
    Fitment Type :Direct Replacement
    Throttle Body Bore Size :92mm
    Interchange Part Number :300-116
    Manufacturer Part Number :300-116
    RPM Range :7000-8000 RPM
    Engine :V8 6.0L 6.2L
    Finish :Natural


    All major credit cards are accepted through secure payment processor Ebay payment.Payment must be received within 7 business days of auction closing.

    We usually ship within 1-3 business days(Monday- Friday)after receiving cleared payment.

    The orders of Friday would be shiped in the next Monday.

    We will ship our product from United States, and it may takes about 3 to 10 business days to arrive your place.

    Change-of-mind return can only be accepted within 7 days after purchase.

    All other returns can be accepted in 30 days.

    And our Office is closed on weekends and public holidays.

    We apologize for the late reply during the holidays.


    All rights reserved.