The DeepCool FL12R WH is a 3-pack of 120mm reverse-blade ARGB fans designed for PC builders who want clean RGB lighting from both intake and exhaust positions without visual obstruction. Each fan combines fluid dynamic bearings and vibration isolation with addressable LEDs to balance cooling performance and quiet operation.

Why This Product

• Reverse blade design shows RGB from both sides — The reversed fan blade eliminates the typical cross-shaped obstruction, so the halo ring of 36 ARGB LEDs remains uninterrupted whether the fan pulls air in or pushes it out.
• Daisy-chain connectors simplify wiring — The integrated 8-pin connector combines PWM control and ARGB sync in one cable, reducing cable clutter and making installation safer.
• Fluid dynamic bearing keeps noise low — Paired with full-coverage rubber isolation pads at each corner, the bearing design keeps vibration minimal and sound under 34 dB(A).
• Reinforced composite frame and polycarbonate blades — PBT-based frame material and polycarbonate blades provide durability and balanced airflow across a wide speed range.

At a Glance

Quantity	3 fans per pack
Size	120 × 120 × 25 mm
Speed range	500-2150 RPM
Noise level	≤33.9 dB(A)
LED type	Addressable RGB (ARGB Gen2), 36 per fan
Connector	8-pin daisy-chain (PWM + ARGB)

Compatibility

• ✓ Motherboards with standard PWM fan headers and 5V addressable RGB (ARGB) connectors.
• ✓ Works as intake or exhaust fans in any standard 120mm fan mounting position.
• Note: RGB control requires a motherboard or controller with ARGB headers; fans operate without lighting if only PWM is connected.

Best For / Trade-offs

Best for:

• RGB-focused builds where lighting aesthetics matter from every angle
• Builders who value quiet operation and low vibration in mid-range cooling systems
• Systems needing balanced airflow and static pressure for air or water cooling radiators
• Cable-management-conscious builds thanks to simplified daisy-chain wiring

Trade-offs:

• High-airflow applications — maximum of 55 CFM per fan limits total system airflow in large cases or heavy thermal loads.
• Non-RGB systems — the 36 LEDs per fan add cost and power draw if you plan to disable lighting entirely.
• Legacy or budget motherboards without addressable RGB headers will not control the lighting.

Description

The FL12R WH was meticulously engineered by the DeepCool team to provide a unique light effect with reversed fan blade, ensuring high performance, low noise, and outstanding quality. Three FL12R WH fans are included in this package.

FL12R WH integrates a total of 36 ARGB Gen2 LEDs, with the halo ring elevating its design aesthetics to a whole new level. Say goodbye to the "cross" on the other side - now you can use the fan as an intake fan and enjoy uninterrupted RGB fan look on both intake and exhaust.

Equipped with a long-life fluid dynamic bearing. The FL12R WH PWM fans boast exceptional cooling specs while remaining relatively quiet.

The entire structure and dynamic balance are further strengthened by using an enhanced composite material based on PBT for the frames and polycarbonate for the fan blades.

The 8-pin connectors, integrated with PWM and ARGB SYNC, provide a more accessible and safer user installation experience.

Full-coverage rubber pads at each corner guarantee minimal fan vibration and ensure that noises resulting from uneven mounting pressure are minimized.

Specifications

Fan

Brand	DeepCool
Model number	R-FL12R-WHAPN3-G
Colour	White
Size	120 × 120 × 25 mm
Total weight	543 g
Bearing type	Fluid Dynamic Bearing
Frame material	Enhanced composite material based on PBT
Blade material	Polycarbonate

Performance

Speed range	500-2150 RPM ±10%
Airflow	55 CFM
Static pressure	2.59 mmAq

Acoustics & power

Noise level	≤33.9 dB(A)
Fan connector	4-pin PWM
LED connector	3-pin (+5V-D-G)
Daisy-chain	8-pin combined connector
Fan voltage	12 VDC
LED voltage	5 VDC
Fan current	0.15 A
Fan power consumption	1.8 W
LED power consumption	2.75 W