* The handheld force gauge is used for proportional measurement and is compatible with a 4-wire strain sensor

* 3.2-inch color LCD display with a resolution of 320 x 240

* Standard RS232 interface, with TC-ASCII or MODBUS/RTU protocol selectable via parameter settings

* With battery and power adapter

* Measurement speed of 15, 120, 240, 480, 960, 1920 times per second (selectable via parameter settings)

* One external switch input for functions such as zeroing, taring, alarm enable, display lock, clearing peak and valley values, and collection function (selectable via parameter settings)

External power adapter:

* Input: AC 90~260V, 50Hz or 60Hz

* Output: DC 12V/2A, positive inside the interface, negative outside

* Note: Do not use a power adapter which is not included in the package

Built-in battery:

* Continuous use time: about 18~36 hours, depending on the usage

* Charging time: about 4~8 hours

* Lifespan: not less than 1000 full charge and discharge cycles

Insulation resistance:

* ≥100MΩ (500V DC MEGA benchmark). Not applicable when powered by built-in battery

Dielectric strength:

* 2000V AC (test conditions: 50/60Hz, 1 minute). Not applicable when powered by built-in battery

Anti-interference:

* IEC61000-4-2 (electrostatic discharge), level III

* IEC61000-4-4 (electrical fast transient pulse group), level III

* IEC61000-4-5 (surge), level III. Not applicable when powered by built-in battery

Protection level:

* IP65 (product front panel protection) (GB/T42-2008)

Operating environment:

* Ambient temperature: -30 to 60℃ (storage temperature: -40 to 65℃)

* Ambient humidity: 35~85 %R•H, no condensation

* Installation location: Indoor, height <2000m

Other parameters:

* Input signal: proportional measurement. Supports 4-wire strain sensor -14 to 14mV

* Input sensitivity: 0.1uV / d

* Zero adjustment range: -10 to 10 mV

* Gain input range: 1 ~ 12 mV

* Conversion method: Sigma-Delta

* Measurement and control speed: 15, 120, 240, 480, 960, 1920 times/second (set by parameters)

* Non-linearity: ±0.01%F•S (measurement speed 15 times/second)

* Gain drift: < 10 ppm/℃ (matching terminal connectors must be used when connecting a sensor, otherwise the temperature drift characteristics will deteriorate)

* Maximum display accuracy: 1/100000

* Contact input: 1 point external switch input, which can be used for zeroing, taring, alarming, display locking, clearing peak and valley values, etc. (can be selected by parameters)

* DI/DO external power supply voltage: PD+ and PD-interval: +9V~+30V

* Sensor power supply: DC 5V±2%, 100mA (MAX.)

* Alarm output: 2-point OC gate output, ≤35mA

* Communication interface: RS232 interface, TC-ASCII and MODBUS/RTU protocol. Response time: 500μS (measured value)

* Intelligent module: TS (Intelligent module)

* Power specification: V0 (without built-in battery); V1 (with built-in battery)

* 500KG range; M12x1.75; 76.2x50.8x25.4mm

* High measurement accuracy, good stability, good strength, and symmetrical output

* Safe overload 150%

* Alloy steel material

* Special plate cover protection: The middle strain area is protected by a cover. It plays an important role in protecting the core of the sensor, which can extend the service life and ensure normal operation in any harsh environment

* Fixed nut: A unique output signal device with good output symmetry and nut protection to extend the service life

* Output signal fixing device: This interface textile is designed to ensure that the sensor does not have unnecessary collisions during transportation. It is fixed with a nut to prevent the internal connection from falling off. It can also be used to prevent dust and electromagnetic influence on the sensor in industrial occasions

* 1 x Set of Force Gauge with Sensor

* Weight: 1.8kg

Payment Terms

1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.

Shipping Terms

1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.

Return Terms

If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.

Custom Duties & Taxes

1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.

Feedback

1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.