The Fimco 1-1/2 in. Standard 4 outlet indexing valves offers a reliable and economical way to automate multiple zoned irrigation systems. This Hydro Indexing Valve has 1 inlet and 4 outlets which are all designed to fit 1-1/2 in. pipe. The simple design of the valve ensures easy installation and maintenance.

Highlights

• Valve is recommended for use in a pump driven irrigation system
• Above- or below-ground installation for flexible placement options
• 2, 3 or 4-zone indexing capability based on the chosen cam configuration
• Supports manual or automatic operation with a controller (not included) to turn on and off the water supply (pump or solenoid)
• 2, 3 and 4 zone cams included
• 1.9" outlets and inlet made to accept 1 1/2" pipe
• Great alternative to individual solenoid valves
• 1 valve can replace up to 4 1 1/2 in. solenoids
• 1 above ground FIMCO valve controls all zones eliminating the need to dig into the ground to locate electric solenoid valve boxes
• Only use standard clear PVC cement (not included) for installation of the valve and allow 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and not the valve housing
• Please remember that pipe size is measured by inside diameter. This valve is made to accept 1 1/2″ pipe so the outlets and inlets will be larger than the pipe size it receives. Actual inlet and outlet size is 1.9"