6" inch 150mm Notched Rim Diamond Lapidary Rock Saw Blade for Slab Jasper Code ZYP-150-0.5-20

Product Name: 6 inch diamond saw blade, 150mm diamond blade, Lapidary diamond saw

Outside Diameter: 6" (150mm)

Arbor Hole: 3/4" (20mm)

Can be used on 1/2" (12.7mm) or 5/8'' (16mm) arbor with a bushing

Core Thickness: 0.02" (0.5mm) 

Rim Thickness: 0.028" (0.7mm) at notched rim where diamonds are

Recommend RPM: 2550 RPM

Quantity: Only 1 Piece

This blade will perform well on most types of hardness rock.

It has held up extremely well and cuts just about most kind of rock, from the very soft petoskey stone fossils to hard jasper, petrified wood, geodes.

We don't recommend using this blade to cut too hard materials, such as: agate with a Morse hardness of 6-7. Because it is difficult to cut or the blade will be damaged quickly.

Use with light oil or water as a lubricant

A high concentration diamonds are crimped into the blade rim.

More diamonds in the notched rim and a stiffer core make this blade cut faster and provide a long use-life.

These blades work well with most lapidary materials and are a very affordable alternative to name brand blades. Diamonds series blades are a great low cost choice for your lapidary saw.

New, Unused Blade - Not in Original Packaging

These blades were originally packaged in oil so you will see several oil spots on the surface.

We can list any size (outer diameter from 100mm - 1500mm) & amount of this product.

Please let us know if you are looking for other accessories or hardware.