Model: 2.8inch 100kHz-960MHz
Seesii Portable TinySA Spectrum Analyzer, Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function
About this item
- 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer.
- 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration.
- 【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life.
- 【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
- 【Package List】1x Tiny Spectrum Analyzer; 2 x 20cm RF Cable;1 x USB Cable;1 x SMA Female to Female Connector;1x Touchscreen Pen;1 x SMA Telescopic Antenna.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link.
Product Description
The upgraded tinySA spectrum analyzer with ESD protected function, primarily intended for 0.1MHz to 350MHz
The performance of the 2024 latest version 3.1 TinySA spectrum will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life.
This device features switchable bandpass filters (2.6–640 kHz), a 290-scan-point color display, an MF/HF/VHF attenuator (0–31 dB), and functions as a Signal Generator with sinusoidal output (0.1–350 MHz) and UHF square wave output (240–960 MHz)
Model: 4.0 Inch 100kHz-5.4GHz
SeeSii TinySA Ultra+ ZS406 Spectrum Analyzer, 4.0 Inch 100kHz to 5.4GHz Handheld Tiny Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator MF/HF/VHF UHF Input,V0.4.6.1,2025 Upgraded
- Upgraded ZS406 TinySA Ultra+:This New Version V0.4.6.1 Spectrum Analyzer is developed by Hugen, with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.4GHz widely measure range, with the new ESD protection function, the product has a higher anti-static lAevel and a longer service life, and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage
- Frequency Range: Compared to the tinysa (100kHz to 960MHz), the upgraded tinysa ULTRA+ has 100kHz to 5.4GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz.Switchable resolution band pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields
- 2 in 1 Multifunctional Frequency Analyzer & Signal Generator:When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration
- PC Control: Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator.Tinysa-APP transfers data directly to the computer.The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel
- Ultra-long Battery Life: The upgraded tinysa analyzer built-in 5000mAh rechargeable battery,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently
Product Description
Seesii 2025 Upgraded Tinysa Ultra+ ZS406 100kHz–5.4GHz Spectrum Analyzer
Features a 4.0-inch HD touchscreen with up to 450 scan points for clear visualization of complex spectrum data. While ESD protection and the latest V0.4.6 hardware system provide professional and stable performance.
2-in-1 Function
Integrates a 100kHz-5.4GHz spectrum analyzer (Ultra Mode and High-Performance Normal Mode) and a signal generator (sine wave, square wave, mixed signal output)
TinySA ULTRA+ vs. TinySA Spectrum Analyzer
TinySA ULTRA+ offers a 4-inch screen, 5.4GHz range, and 5000mAh battery, compared to TinySA with a 2.8-inch screen, 960MHz range, and 650mAh battery.
PC Control Available
Connect via USB to function as a PC-controlled Spectrum Analyzer or Signal Generator. Tinysa-APP enables direct data transfer, with the CDC protocol supporting comprehensive measurement and setting commands. Automatic Windows driver installation and native Linux kernel support.
Model: 4inch 100kHz-7.3GHz
SeeSii TinySA Ultra+ ZS407 7.3GHz Spectrum Analyzer: 2025 Upgraded 4 Inch HW V0.5.4 100kHz-7.3GHz Handheld Tiny Frequency Analyzer - 2-in-1 RF Signal Generator 100kHz to 900MHz MF/HF/VHF UHF Input
- 2025 Upgraded Tinysa Ultra+ ZS407 Spectrum Analyzer: Supports an ultra-wide frequency range of 100kHz–7.3GHz, delivering precise test data for RF system development, satellite alignment, and frequency verification. Features a 4.0-inch HD touchscreen (480×320 resolution) with up to 450 scan points for clear visualization of complex spectrum data. The intuitive interface ensures ease of use, while ESD protection and the latest V0.5.4 hardware system provide professional and stable performance.
- Broad Frequency Coverage: Supports 100kHz–7.3GHz, ideal for 5G NR, Wi-Fi 6E, satellite communications, and higher wireless frequency bands. Calibrated up to 8GHz, it enables broader applications for high-frequency testing in lab environments. Standard mode covers 100kHz–800MHz, while ULTRA mode extends to 6GHz. With 200Hz–850kHz RBW, it ensures fast, efficient measurements, meeting high-precision needs like SSB two-tone intermodulation tests.
- Robust Signal Generation: Functioning as both a spectrum analyzer and signal generator, it produces MF/HF/VHF sine waves from 100kHz-900MHz, UHF square waves from 800MHz-6.3GHz, and mixed signals from 4.4GHz-6.3GHz. Our spectrum analyzer antenna's versatility is perfect for RF system development, wireless communication debugging, and RF interference detection, aiding professionals in identifying and resolving frequency issues.
- Convenient PC Control and Data Transfer: With USB and TinySA-APP connectivity, the device supports real-time data display and transfer, enhancing data management efficiency. This sdr spectrum analyzer includes a 32GB MicroSD card for easy data storage and sharing, catering to spectrum scanning, signal detection, and radio noise measurement needs.
- 10-Hour Working Time: Powered by a 5000mAh rechargeable battery, it offers up to 10 hours of continuous operation, ideal for field use by RF interference troubleshooters and satellite communication technicians. This signal analyzer's compact design makes it portable for various work environments, facilitating quick wireless signal detection and analysis for electronic and audio technicians.
- Built-in LNA and Attenuator: The integrated LNA and attenuator adapt to high-frequency signal strength variations, delivering superior signal detection. This tiny sa ultra+ supports output power from -115dBm to -19dBm, performing tests across different signal strengths. With extremely low phase noise (-100dBc/Hz at 10kHz offset) and high DANL accuracy, Seesii rf spectrum analyzer meets the demanding testing requirements of amateur radio enthusiasts, electronic test engineers, and RF developers.
- Packing List: 1x Seesii Tinysa ULTRA+ ZS407 Spectrum Analyzer devoloped by Hugen; 1x 32GB Micro SD card (plugged in the host); 2x 30cm ALSR100 SMA cables; 1 x USB Type-C data cable; 1x SMA-SMA barrel connector; 1x TLanyard and touch plectrum; 1x Antenna with SMA connector; 1x stylus pen
Product Description
Seesii 2025 Upgraded Tinysa Ultra+ ZS407 100kHz–7.3GHz Spectrum Analyzer
Features a 4.0-inch HD touchscreen with up to 450 scan points for clear visualization of complex spectrum data. While ESD protection and the latest V0.5.4 hardware system provide professional and stable performance.
The TinySA Ultra+ ZS407 Spectrum Analyzer Functioning as both a spectrum analyzer & signal generator, it produces MF/HF/VHF sine waves from 100kHz-900MHz, UHF square waves from 800MHz-6.3GHz, or RF test signal output up to 7.3 GHz.
Am 26.07.2026 hat der Verkäufer die folgenden Angaben hinzugefügt: