Application

For Subaru Impreza WRX 2000.08-2007.06 GDA GD9 GGA
For Subaru Impreza WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100)
For Subaru Forester SG 2003-2008
For Saab 9-2X 2005-2007 GGA GGE

Note: The coilovers kit will "Lower your car" and does not keep to the original ride height.

Specification

Height adjustable: Yes, lowering 25-75mm depending on the vehicle models

Damping : Not adjustable

Front top mount: Pillow ball with camber plate
Rear top mount: Pillow ball
Camber adjustable: Available
Spring rate Front: 9 kg/mm (504 lbs/in)
Spring rate Rear: 7 kg/mm (392 lbs/in)
Front spring inner diameter: 62 mm
Rear spring inner diameter: 62 mm
Spring length Front: 190 mm
Spring length Rear: 250 mm
Spring Preload advised: 7-10 mm

Damping rod diameter Front: Φ 18 mm
Damping rod diameter Rear: Φ 18 mm

Damping  thread Front:  M50×1.5 mm
Damping  thread Rear: M50×1.5 mm

Twin -tube Diameter Front: 50 mm
Twin -tube Diameter Rear: 50 mm

Rod End Thread Front: M14×1.5 mm
Rod End Thread Rear: M14×1.5 mm
Front Collapsed Length: 410 mm / 16.14"
Front Extended Length: 500 mm / 19.69"
Rear Collapsed Length: 600 mm / 23.62"
Rear Extended Length: 670 mm / 26.38"
 

Package included
2 x Front coil-overs
2 x Rear coil-overs
2 x C spanners

Dimension
Package size : 70*51*20 cm
Weight: 28550 g

Feature

1. Self-design structure and new manufacturing system to give more customers good coil-overs without breaking the bank.
2. Height adjustable---lower your car 25-75mm (depending on vehicle models) to get a performance ride
3. Independent Ride Height and Spring Pre-load Adjustments
4. Twin-Tube System for Comfortable Ride on Streets
5. Coated finish to avoid rust
6. Heavy Duty Steel Lower Mounts
7. Simple install, easy to adjust.

Notice

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. (The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3–4 months will keep it smooth and clean, which helps to extend the lifetime.