• Fits Vehicles of the Following Years and Make:
    • 2006-2013 Chevrolet Impala Hood lift support  2014-2016 Chevrolet Impala Limited  2006-2007 Chevrolet Monte Carlo Hood lift support
     
  • Item Description:

    • Qty2 Front Hood Lift Support For 2006-2016 Chevy Impala 2006-2007 Monte Carlo

    Fits Vehicles of the Following Years and Make:

    • 2006-2013 Chevrolet Impala Hood lift support
      2014-2016 Chevrolet Impala Limited
      2006-2007 Chevrolet Monte Carlo Hood lift support

     

    Item Description:

    • Vehicle Location : Hood
    • Set Quantity: 2 Pcs
    • Extended Length [in] : 21.12"
    • Compressed Length [in] : 13.87"
    • Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes
    • Twin Tube internal construction-Premium gas-charged cylinders
    • Direct fit,Ensures easy installation and precise operation
    • Individually tested for performance and reliability
    • Brand new and warranty offered!!

     

    Important Notes about Lift Supports :

    1. Use Safety stands whenever a procedure requires you under the vehicle or supports. It is best for two people to assist in the replacement and one to help to avoid p"ing when replacing.
    2. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended Length.
    3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.
    4. Lift Supports need to be installed fully 4.extended. In most cases you just can't compress them unless they are on the vehicle. 
    5. The support rod piston rod must be installed in a downward position, not upside down, so as to reduce friction and ensure the best damping quality and cushioning function.　
    6. The hydraulic support bar should not be subjected to tilt force or lateral force during work. It should not be used as a handrail.
    7. If you have any issues during the installation PLEASE contact us. Never force a support.

    Item Specifics
    Brand hqas-accessories
    Manufacturer Part Number HQ116695A01
    Manufacturer Warranty 5 Years
    Placement on Vehicle Left,Right,Front
    Installation position Hood
    Other Part Number 025853,10330397,15833919,437610,4582,9731VP,SG330087
    Extended Length 21.12"
    Compressed Length 13.87"
    Material Steel
    Kit or Single Part Kit
    Modified Item NO
    Superseded Part Number 025853,10330397,15833919,437610,4582,9731VP,SG330087
    Interchange Part Number 025853,10330397,15833919,437610,4582,9731VP,SG330087
    Type Struts
    Fitment Type Direct Replacement
    Custom Bundle Yes
    Mounting Hardware Included No
    Force Newtons 500N
    Superseded Part Number 025853,10330397,15833919,437610,4582,9731VP,SG330087
    Interchange Part Number 025853,10330397,15833919,437610,4582,9731VP,SG330087
    Type Struts
    Fitment Type Direct Replacement
    Custom Bundle Yes
    Mounting Hardware Included No
    Mounting Hardware Included No

    Payment

    We accept multiple payment methods
    Payments are expected within 7 days after the last winning auction is closed;
    Otherwise Unpaid Item Dispute will be filed with eBay.

    Shipping
    • Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most  of countries.
    • All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    • We ship the package to your shipping address in eBay. Please tell us your shipping address if it is different from the one in eBay.
    • The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    • We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.

     

    Returns
    We stand behind every product we sell.
    • All of our brand new items come with a 60-Days money-back or exchange guarantee.
    •  
    Contact Us

    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    We are dedicated to provide high quality products and satisfied customer service to our sincerely customers, so if there's any questions or problems with our products or service, feel free to contact us please.

    Qty2 Front Hood Lift Support For 2006-2016 Chevy Impala 2006-2007 Monte Carlo

    Fits Vehicles of the Following Years and Make:

    • 2006-2013 Chevrolet Impala Hood lift support
      2014-2016 Chevrolet Impala Limited
      2006-2007 Chevrolet Monte Carlo Hood lift support

     

    Item Description:

    • Vehicle Location : Hood
    • Set Quantity: 2 Pcs
    • Extended Length [in] : 21.12"
    • Compressed Length [in] : 13.87"
    • Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes
    • Twin Tube internal construction-Premium gas-charged cylinders
    • Direct fit,Ensures easy installation and precise operation
    • Individually tested for performance and reliability
    • Brand new and warranty offered!!

     

    Important Notes about Lift Supports :

    1. Use Safety stands whenever a procedure requires you under the vehicle or supports. It is best for two people to assist in the replacement and one to help to avoid p"ing when replacing.
    2. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended Length.
    3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.
    4. Lift Supports need to be installed fully 4.extended. In most cases you just can't compress them unless they are on the vehicle. 
    5. The support rod piston rod must be installed in a downward position, not upside down, so as to reduce friction and ensure the best damping quality and cushioning function.　
    6. The hydraulic support bar should not be subjected to tilt force or lateral force during work. It should not be used as a handrail.
    7. If you have any issues during the installation PLEASE contact us. Never force a support.


    We accept multiple payment methods
    Payments are expected within 7 days after the last winning auction is closed;
    Otherwise Unpaid Item Dispute will be filed with eBay.

    • Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most  of countries.
    • All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    • We ship the package to your shipping address in eBay. Please tell us your shipping address if it is different from the one in eBay.
    • The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    • We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.

     

    We stand behind every product we sell.
    • All of our brand new items come with a 60-Days money-back or exchange guarantee.
    •  

    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

    We are dedicated to provide high quality products and satisfied customer service to our sincerely customers, so if there's any questions or problems with our products or service, feel free to contact us please.


    All right reserved.
    Shop Category
     Store Home
     Horn
     Power Brake Booster
     Dipstick
     Ballast Module
     Struts & Suspension Kit & Hubs
     Air Ride Suspension Valve
     Shock & Strut
     Air Shock
     Shock absorber assembly
     Lift Support
     Coilovers
     Bumper
     Brake Caliper
     Botorcycle Exhaust Pipe
     Air Dryer
     Adjustable Rear Control Arm
     Air Intake Snorkel
     Air Suspension Valve Solenoid
     Mud Flaps
     Protection Shield & Lift Kit
     Cylinder Piston Kit
     Strut Mount
     Brake Drums & Brake Shos
     Mass Air Flow Sensors
     Household Air Cooler
     Brake Pads & Brake Shoes
     Wheel Hub Bearing
     Coil Spring
     wheel hub bearing knuckle
     Steering Knuckle & Other
     Other
    Hot Item
    Delivery

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us