TPMS Relearn Tool Sensor Reset Activation Programming For Buick Chevy Cadillac 

 tpms relearn tool  


Mainly functions:
1. TPMS relearn.
Summer or Winter tire change, TPMS system light on, this tool would relearn and turn off TPMS light.

2. TPMS brand new / used tire sensor condition diagnostic.
Per LED indicator status, help car owner judge tire sensor condition. Press button,if LED flash, TPMS relearn process failed or tire sensor does not do any response. It means tire sensor TPMS information are blank,battery ran out. This tool requires, that completed programmed, tire sensor and fully charged tire sensors. It could not  programming any tire sensor. 



Applicable Models

Factory Tested Models:

2006-2020 For almost all Series vehicles: Buick, Cadillac, Chevy, GMC, Opel, etc.,

2010: Acadia, Enclave. OUTLOOK, Traverse (VIN R/V), Allure, LaCrosse (VIN G), Antara.Captiva, Terrain, Winstorm, Avalanche. Escalade, etc.,

2011: Acadia, Enclave, Traverse (VIN R/V), Alpheon, Antara. Captiva, Astra, Avalanche. Escalade, Suburban, Tahoe, Yukon (VIN C/K), Aveo, Barina (VIN S/T), etc.,

2012: Acadia, Enclave. Traverse (VIN R/V), Alpheon (2706), Ampera,

Volt (VIN R) (Europe), Antara, Captiva, Astra-J (2857), Avalanche, Escalade, etc.,

2013: Acadia, Enclave, Traverse (VIN R/V) (3206), Alpheon (3094), Ampera, Volt (VIN R) (Europe) (3211), Antara, Captiva (5376555),Insignia (3098), etc.,

 

Customer Tested Models:

2006-2013: Corvette, Nissan Frontier, Cadillac Escalade , GMC Acadia, GMC Yukon Denali, etc.,

2014-2015: Acadia, Buick Enclave, Buick Encore, Buick Lacrosse, Cadillac ATS, Cadillac CTS , etc.,

2016-2018: Acadia, Buick, Buick cascada, Cadillac XTS, Chevrolet Express 3500, Chevrolet SS Sedan, etc.

 

When you need this tire relearn tool?

1. New TPMS sensors installed, letting air out or adding air in to the tire couldn’t make the system recognize new sensors.

2. Do tire rotation, didn’t have a quick and easy way to let ECU relearn new tire information.

3. When tire pressure indicator light ON, after the maintenance performed, the tire pressure needs to be reset to turn off the TPMS light.

4. Low tire pressure or leakage /replacement or installation of tire pressure monitoring equipment / tire replacement, sensor damage, etc. After those problems solved, TPMS needs to be reset.

5. Exchanging the winter tires or Summer tires.

 

How to enter to car TPMS learning mode?

1. Turn on the ignition, make the gear in P position.

2. Use cruise function, choose TPMS leaning mode in the dashboard settings.

3. The car horn will beep twice and the TPMS indicator flashes, then the learning mode has been successfully entered.

 

How to use the EL-50448 TPMS relearn tool?

1. Set the car in TPMS learning mode. (car horns twice)

2. Starting relearn process from left front tire, point antenna on correct position. Press & hold power button. Once the speaker chirped, move to the next tire.

3. Follow this order to rest TPMS sensors: Front left, front right, rear right, rear left.

4. After all sensors reseted, the car horns twice means TPMS re-learn finished.

 

TIPS:

 

Package included:
1x Tool
1x User manual


FAQ:
Q: Why I press the button, the tool and our tire does not do any response?
A: This tool requires followings:
a. Brand new programmed tire sensor. (Do not use old or last year tire or tire sensors. Some brand new or OEM tire sensor are blank, it requires programe first. Old tire or old tire sensors, the battery capacity at very low power or 0%.)
b. Brand new 9V battery.  
c. Enter car tpms relearn mode first.
d. Your car model and year in this tool supports car list.
Read user manual and following steps operation and location.
Check the led indicates status,when you press button. If the led light flash, it means this tool work in good condition and send signal to tire. If your tire does not response, consider above requires things. Which one tire does not response, which tire needs replace.  If the led light does not lights up, replace brand new battery.
 

TPMS Tool For Cadillac Tire Pressure Monitor Pressure Sensor Relearn Reset