• [Plasma Cutting Thickness]: The plasma cutting equipment with advanced IGBT inverter technology, this high-frequency plasma cutter operates on both 110V and 220V power sources at 50/60 Hz, offering a 60% duty cycle. When using 110V power, it delivers 15-40A of cutting current; on 220V, it ranges from 15-55A. The recommended maximum cutting thickness is 12mm at 40A and 45PSI on 110V , and 20mm at 65A and 70PSI on 220V
• [Non-Touch Pilot Arc Plasma Cutter]: The CUT65i plasma cutter features a pilot arc function that utilizes high-frequency, non-touch pilot arc. The torch doesn’t need to touch the metal surface to start cutting. The PA (Pilot Arc) adjustable setting allows users to control how long the pilot arc remains active, helping reduce power consumption when not in use and decreasing electrode wear, which ultimately prolongs the life of consumables
• [Built-in Air Sensor System]: This machine includes an internal air sensor that shows air pressure directly on the front panel. Manual adjustment is possible via the air regulator (automatic pressure adjustment is not supported). A rear-mounted air filter and quick-connect 1/4 NPT fitting allow for fast setup. It’s ready to use right away when connected to an air compressor, with optimal performance at 65 PSI and 250 liters per minute airflow (NOTE: Not included the air compressor)
• [PT/2T/4T/PA Function]: The post-flow cooling time can be adjusted between 3-15 seconds, which helps dissipate heat from the torch head and extend the life of consumables. A setting of 4-8 seconds is typically suggested for optimal performance. The 2T/4T modes provide different levels of automation in cutting operations, reducing the need for manual control. In 2T mode, the system offers semi-automatic operation, while 4T enables fully automatic cutting. The PA (Pilot Arc) function allows adjustment of the pilot arc duration - longer durations are suitable for cutting materials like mesh metal, while shorter durations help reduce wear on consumable parts
• 100% Duty cycle in light work, 60% Duty cycle in heavy work; Max cutting thickness 12mm in 110V 45PSI 40Amps 100mm/min cutting speed, Max cutting thickness 20mm in 220V 70PSI 65Amps 150mm/min cutting speed
• [Screen Display Synergic Control]: Equipped with a clear digital display, this unit provides real-time monitoring of key parameters such as air pressure, voltage, and current. Users can easily adjust settings on the fly, improving overall efficiency. In case of a malfunction, the screen will show an error code, making it easier to identify and resolve issues quickly

    SHIPPING

      . We ship to US territories and worldwide. Please contact us if you have any special shipping instructions.

      Return Policy 

• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through eBay's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.

      Feedback

• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through ebay message center if you have any problems, we will always try our best for 100% customer satisfaction.