TPS63020 Buck-Boost Spannungsregler-Modul mit bis zu 96 % Wirkungsgrad.

Eingang: 1,8–5,5 V • Ausgangsstrom bis 3 A • automatische Step-Up/Step-Down Umschaltung.

Ideal für Batterie- und Lithium-Akku-Projekte, Kameras, mobile Geräte und DIY-Elektronik.

Product Parameters:

• Input voltage: 1.8V-5V (recommended input above 2V)

• Output voltage: 2.5V 3.3V 4.2V 5V

• Output formula: R3 = R1 (Vout/VFB-1) typical value VFB = 500mV (2.5V: R1 = 82K, R3 = 330K; 3.3V: R1 = 180K, R3 = 1M; 4.2V: R1 = 3K, R3-22K; 5V: r1 = 110K, R3 = 1M)

• Output current: within 3A

• Conversion efficiency: 96% (the smaller the input and output pressure difference, the higher the efficiency)

• Static power consumption: 6mA, 50uA (power saving mode)

• Switching frequency: 2.4mhz

• Output ripple: 10mV (no load) 10mV (buck with 0.5A, 30mV (boost with 0.5A)

PS: Point-saving mode (1 is disabled, O is enabled, and the module is disabled by default). If you want to use this function, you need to disconnect SB1, and then input the level

EN: Enable input (1 is enabled, O is disabled, and the module is enabled by default). To use this function, disconnect SB2, and then input the level

PG: output status indication (O fault, 1 normal)