4mm x 10m Crack Stitching Helical Coils ideal for thin bed joints

 
For crack stitching and brickwork repairs in thin mortar bed joints. 4mm Strucsol Ultra bar can be inserted and bonded into mortar joints as thin as 6mm.
 
Applications
 

• Crack stitching
• For repair of failed masonry walls
• As an anchor in stone, concrete, AAC and brickwork 
• For lintel repair

• We recommend the use of Strucsol HS grout for bonding wires in Lime mortar, brick or stone walls where the slower curing times assist in gaining clean installation.
• We recommend the use of Strucsol E.A.S.F resin, when immediate full bond strength is required.

 
Material

304CU Austinetic Stainless steel

Dimensions

4mm x 10 metres (10,000mm)

Why buy from Strucsol?

At Strucsol we provide the highest grade reinforcing stitching wire- manufactured in the UK out of 304 CU Austenitic stainless steel, unlike lower grade alternatives manufactured from ferritic stainless steel. This means that it has high linear strength and corrosion resistance allowing for consistent maximum bond strength gain when paired with the grout or resin bonding adhesive.

Strucsol Ultrabar can be used with great confidence and durability in areas of High salinity such as costal properties without fear of corrosion or fatigue failure.

We are the manufacturers of this product so are able to offer the best possible prices for the highest grade products.

Read a full comprehensive list of repair guides specific to your job- our extensive guides that cover all the repairs you might require. Below are the most common types of repairs using this product. 

4mm Thin Joint Stainless Steel Helical Coils (10metres) For Crack Stitch Repairs

 4mm x 10m Crack Stitching Helical Coils ideal for thin bed joints For crack stitching and brickwork repairs in thin mortar bed joints. 4mm Strucsol Ultra bar can be inserted and bonded into mortar joints as thin as 6mm. Applications Crack stitchingFor repair of failed masonry wallsAs an anchor in stone, concrete, AAC and brickwork For lintel repairWe recommend the use of Strucsol HS grout for bonding wires in Lime mortar, brick or stone walls where the slower curing times assist in gaining clean installation.We recommend the use of Strucsol E.A.S.F resin, when immediate full bond strength is required. Material 304CU Austinetic Stainless steel Dimensions 4mm x 10 metres (10,000mm) Why buy from Strucsol? At Strucsol we provide the highest grade reinforcing stitching wire- manufactured in the UK out of 304 CU Austenitic stainless steel, unlike lower grade alternatives manufactured from ferritic stainless steel. This means that it has high linear strength and corrosion resistance allowing for consistent maximum bond strength gain when paired with the grout or resin bonding adhesive. Strucsol Ultrabar can be used with great confidence and durability in areas of High salinity such as costal properties without fear of corrosion or fatigue failure. We are the manufacturers of this product so are able to offer the best possible prices for the highest grade products. Read a full comprehensive list of repair guides specific to your job- our extensive guides that cover all the repairs you might require. Below are the most common types of repairs using this product.