If you want great quality at a great price for your hot rodding project look no further.
Up for sale is a hand built, chambered Alder Strat body with a flame maple drop top, full 1/4". Ready for final sanding and finish application Specs below. The body pictured is what you will get.
NOTE: This is an unfinished body sanded to 220 grit and we have wetted it before taking the picture to show the figure as if it had finish. Some sanding and/or grain filling may be required
Made by hand in the USA by Sonorous Custom Guitars, with 14 years of luthier experience.
********** Please read through entire listing before considering a purchase and thank you for having a look! **********
Body wood: 2 piece Superior Alder
Top wood: 2 piece book matched flame maple
Total thickness: 1 & 3/4"
Top thickness: 1/4"
Edge radius: 1/4"
Weight: 3 lbs 5 oz
Neck pocket: 2 & 3/16" wide and 5/8" deep (2&15/16" long pocket) (EXACT DIMENSIONS) **Designed for necks with scale lengths of 25 & 1/2" and 21 frets (or a neck with an overhanging fingerboard with 22 frets) ONLY
Chambered: Message for routes if needed. Carve into this at your own risk
Comfort carves: Arm contour and belly carve
Bridge routes: Tremolo block route on top is 3/4" by 3 & 3/16". Distance from end of neck pocket to front edge of tremolo block route is 7 & 3/8". Fits many two post and 6 screw style tremolos, Will need to be drilled for mounting screws/posts.
Back route is 5/8" deep and will need to be drilled for spring claw.
Electronics routes: Single coil pickups cavity depth = 3/4" pickup cavities are for strat style pickups (3 & 1/4" by 1") direct mount recommended. Humbucker pickups cavities are 1 & 9/16" by 3 & 3/8" (bracket to bracket) and are 3/4" deep. Control cavity depth = 1.6" (easily accommodates hardware) Jack cavity diameter = 7/8" Volume/tone hole diameter = 3/8" All wire channels have been drilled.
Optional middle single coil pickup route available for NO UPCHARGE
Backplates: 3/32" thick. Control cover is recessed, tremolo cover is NON-recessed. We leave the tremolo cover non-recessed to accommodate longer blocks.
NOTE: Please use the above measurements as a guideline for your hardware to ensure fit. We took care to make sure this body is as universally compatible with most US parts associated with this style of guitar but adjustments may have to be made.
Free ground shipping! Excludes Hawaii/Alaska
We reserve the right to change shipping carrier
International sales are handled through eBay's International shipping program.
30 day returns accepted
Made at isdntek PrettyBorders