1. We require immediate payment.
2. We currently accept payment via eBay managed payments only.
3. Once payment is cleared, we will dispatch your shipment within 1-3 business days. Please refer to the "Shipping" tab for more information regarding shipping speed to your destination.
Pre-Pressurized Accumulator Tank,25.3 oz (0.75L) 125 PSI Water Pump Flow Control with Internal Bladder Reduced Pump Cycling, Suitable for RV, Boat, Travel Trailer, Caravan
Product description
Specifications:Internal Volume: 25.3 oz （0.75L）Maximum Pressure:125 PSI (8.6 BAR) Pre-Charge Pressure:10 PSI (0.7 BAR) Flow Rate:125 gallons per minute (GPM) Inlet/Outlet Size: 1/2" MNPT
Extend the Service Life of The Pumps: Store the water pressure of the water pipe during peak hours, buffer the impact damage caused by high water pressure on the pump, reduce noise, reduce frequent pump starts, and provide a more stable water supply
Widely Applied:The RV water accumulator can be applied for water supply of RV agricultural irrigation,liquid transfer, yacht pressurization, floor pressurization and equipment cooling water circulation, etc, and can be applied to most pumps on the market
Quiet Operation and Noise Reduction:The soft rubber base can suppress vibration and reduce noise, creating a more comfortable and less disruptive water system experience
Easy to Install:Please read the instructions carefully before use. Adjust the air pressure in the water tank to be lower than the pressure of the pump switch 3psi (0.2bar), Built-in two wing nut fittings, Connect the wing nut fittings to the energy storage One end of the accumulator tank, The hose is fixed by the clamp,and the hose connects the accumulator tank and the pump
Extend the Service Life of The Pumps: Store the water pressure of the water pipe during peak hours, buffer the impact damage caused by high water pressure on the pump, reduce noise, reduce frequent pump starts, and provide a more stable water supply
Widely Applied:The RV water accumulator can be applied for water supply of RV agricultural irrigation,liquid transfer, yacht pressurization, floor pressurization and equipment cooling water circulation, etc, and can be applied to most pumps on the market
Quiet Operation and Noise Reduction:The soft rubber base can suppress vibration and reduce noise, creating a more comfortable and less disruptive water system experience
Easy to Install:Please read the instructions carefully before use. Adjust the air pressure in the water tank to be lower than the pressure of the pump switch 3psi (0.2bar), Built-in two wing nut fittings, Connect the wing nut fittings to the energy storage One end of the accumulator tank, The hose is fixed by the clamp,and the hose connects the accumulator tank and the pump
PLEASE MESSAGE US IF YOU HAVE ANY OTHER QUESTIONS, AND MANY THANKS FOR READING ALL OF THIS.