DOWSIL 795 16 count sausage like tube 20 ounce case new unopened shipped with priority mail expiration date 13th February 2026 color bronze

DOWSIL™ 795 Silicone Building Sealant
Description Neutral, one part silicone sealant Sustainability Attribute:
Uses /
Applications
 Structural and nonstructural glazing
 Structural attachment of many panel systems
 Panel stiffener applications
 Weather sealing of most common construction
materials including glass, aluminum, steel,
painted metal, EIFS, granite and other stone,
concrete, brick and plastics
Composition  One–part, neutral cure, RTV silicone sealant
Benefits  Suitable for most new construction and remedial sealing applications
 Versatile – high performance structural glazing and weather sealing from a single
product
 Available in 15 standard colors; custom colors also available
 Excellent weatherability virtually unaffected by sunlight, rain, snow, ozone and
temperature extremes of -40°F (-40°C) to 300°F (149°C)
 Excellent unprimed adhesion to a wide variety of construction materials and building
components, including anodized, alodined, most coated and many Kynar painted
aluminums
 Ease of application – ready to use as supplied
 Ease of use – all temperature gunnability, easy tooling and low-odor cure byproduct
 Meets global standards (Americas, Asia and Europe)
Typical Properties
Specification Writers: These values are not intended for use in preparing specifications.
Test1 Property Unit Result
As Supplied
ASTM C 679 Tack Free Time, 50% RH hours 3
Curing Time at 25°C (77°F) and 50% RH days 7–14
Full Adhesion days 14–21
ASTM C 639 Flow, Sag or Slump inches (mm) 0.1 (2.54)
Working Time minutes 20–30

Typical Properties (Cont.)
Test Property Unit Result
VOC Content2 g/L 30
As Cured After 21 Days at 25°C (77°F) and 50% RH
ASTM D 2240 Durometer Hardness, Shore A points 35
ASTM C 794 Peel Strength lb/in (kg/cm) 32 (5.7)
ASTM C 1135 Tension Adhesion Strength
At 25% Extension
At 50% Extension
psi (MPa)
psi (MPa)
45 (0.310)
60 (0.414)
ASTM C 719 Joint Movement Capability percent ±50
ASTM C 1248 Staining (Granite, Marble, Limestone, Brick and Concrete) None
As Cured After 21 Days at 25°C (77°F) and 50% RH Followed by 10,000 Hours in a QUV Weatherometer, ASTM G 53
ASTM C 1135 Tension Adhesion Strength
At 25% Extension
At 50% Extension
psi (MPa)
psi (MPa)
35 (0.241)
50 (0.345)
Description Approvals/
Specifications
2. Based on South Coast Air Quality Management District of California. Maximum VOC is listed both inclusive and
exclusive of water and exempt compounds.
DOWSIL™ 795 Silicone Building Sealant is a one-part, neutral-cure, architectural-grade
sealant that easily extrudes in any weather and cures quickly at room temperature. This
cold-applied, non-sagging silicone material cures to a medium modulus silicone rubber upon
exposure to atmospheric moisture. The cured sealant is durable and flexible enough to
accommodate ± 50 percent movement of original joint dimension when installed in a
properly designed weather seal joint. In a properly designed structurally glazed joint, the
sealant is strong enough to support glass and other panel materials under high wind load.
DOWSIL™ 795 Silicone Building Sealant meets the requirements of:
 Federal Specification TT-S 001 543A (COM-NBS) Class A for silicone building sealants
 Federal Specification TT-S-00230C (COM-NBS) Class A for one-part building sealants
 ASTM Specification C 920 Type S, Grade NS, Class 50, Use NT, G, A and O
 ASTM Specification C 1184 for structural silicone sealants
 Canadian Specification CAN2-19.13- M82