1Set Soldering Practice Board PCB Board Electronics Kit Prototype DIY Welding
This soldering kit electronics practice board is a teaching beginner kit for people who want to improve the welding skills.The welding product is a beautiful water lamp circuit.
Specification:
Product:Electronic Production Teaching Kit
Applicable voltage: 3~12V
PCB board size: 85.5*54*1.5mm/3.36*2.12*0.06inch
Effect: rotating water lamp
Packing List: 1 Set DIY Electronic Experiments Teaching Kit
(12 * 1206 resistors; 12 * 0805 resistors; 12 * 0805 capacitors; 14 * 0603 capacitors; 14 * 0603 resistors; 14 * 0402 resistors; 15 * 0805 resistors (331-335); 15 * LED lights (Red); 4 * transistors; 4 * diodes; 5 * 0805 (10K); 1 * 0805 (2M); 2 * 0805 (104); 1 *NE555 chip; 1 *CD4017 chip; 1 *PCB board; 1 *Battery Box.)
Advantage :
1. The pcb board prototype kit is tinned, not easy to oxidize, high-strength fireproof, anti-drop material, can be disassembled and assembled repeatedly. After welding, you can power on (3-12V) to see the effect.
2. Electronic components are clearly marked. Even beginners can easily solder successfully. 3 columns of components on the left and right are used to practice soldering, and each column has a test point. There is a ruler on the back of the circuit board for easy measurement of components.
Instruction:
1. Please ensure that all components are in the correct direction and position; and check whether pseudo/float welding.
2.Since the accessories are very small, it is recommended to use a pointed clip to assist welding.
Note:
1.Please check compatibility before purchasing.
2.It is normal for the product color to differ from the image due to the luminous effect.
Specification:
Product:Electronic Production Teaching Kit
Applicable voltage: 3~12V
PCB board size: 85.5*54*1.5mm/3.36*2.12*0.06inch
Effect: rotating water lamp
Packing List: 1 Set DIY Electronic Experiments Teaching Kit
(12 * 1206 resistors; 12 * 0805 resistors; 12 * 0805 capacitors; 14 * 0603 capacitors; 14 * 0603 resistors; 14 * 0402 resistors; 15 * 0805 resistors (331-335); 15 * LED lights (Red); 4 * transistors; 4 * diodes; 5 * 0805 (10K); 1 * 0805 (2M); 2 * 0805 (104); 1 *NE555 chip; 1 *CD4017 chip; 1 *PCB board; 1 *Battery Box.)
Advantage :
1. The pcb board prototype kit is tinned, not easy to oxidize, high-strength fireproof, anti-drop material, can be disassembled and assembled repeatedly. After welding, you can power on (3-12V) to see the effect.
2. Electronic components are clearly marked. Even beginners can easily solder successfully. 3 columns of components on the left and right are used to practice soldering, and each column has a test point. There is a ruler on the back of the circuit board for easy measurement of components.
Instruction:
1. Please ensure that all components are in the correct direction and position; and check whether pseudo/float welding.
2.Since the accessories are very small, it is recommended to use a pointed clip to assist welding.
Note:
1.Please check compatibility before purchasing.
2.It is normal for the product color to differ from the image due to the luminous effect.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.
1Set Soldering Practice Board PCB Board Electronics Kit Prototype DIY Welding
This soldering kit electronics practice board is a teaching beginner kit for people who want to improve the welding skills.The welding product is a beautiful water lamp circuit.
Specification:
Product:Electronic Production Teaching Kit
Applicable voltage: 3~12V
PCB board size: 85.5*54*1.5mm/3.36*2.12*0.06inch
Effect: rotating water lamp
Packing List: 1 Set DIY Electronic Experiments Teaching Kit
(12 * 1206 resistors; 12 * 0805 resistors; 12 * 0805 capacitors; 14 * 0603 capacitors; 14 * 0603 resistors; 14 * 0402 resistors; 15 * 0805 resistors (331-335); 15 * LED lights (Red); 4 * transistors; 4 * diodes; 5 * 0805 (10K); 1 * 0805 (2M); 2 * 0805 (104); 1 *NE555 chip; 1 *CD4017 chip; 1 *PCB board; 1 *Battery Box.)
Advantage :
1. The pcb board prototype kit is tinned, not easy to oxidize, high-strength fireproof, anti-drop material, can be disassembled and assembled repeatedly. After welding, you can power on (3-12V) to see the effect.
2. Electronic components are clearly marked. Even beginners can easily solder successfully. 3 columns of components on the left and right are used to practice soldering, and each column has a test point. There is a ruler on the back of the circuit board for easy measurement of components.
Instruction:
1. Please ensure that all components are in the correct direction and position; and check whether pseudo/float welding.
2.Since the accessories are very small, it is recommended to use a pointed clip to assist welding.
Note:
1.Please check compatibility before purchasing.
2.It is normal for the product color to differ from the image due to the luminous effect.
Specification:
Product:Electronic Production Teaching Kit
Applicable voltage: 3~12V
PCB board size: 85.5*54*1.5mm/3.36*2.12*0.06inch
Effect: rotating water lamp
Packing List: 1 Set DIY Electronic Experiments Teaching Kit
(12 * 1206 resistors; 12 * 0805 resistors; 12 * 0805 capacitors; 14 * 0603 capacitors; 14 * 0603 resistors; 14 * 0402 resistors; 15 * 0805 resistors (331-335); 15 * LED lights (Red); 4 * transistors; 4 * diodes; 5 * 0805 (10K); 1 * 0805 (2M); 2 * 0805 (104); 1 *NE555 chip; 1 *CD4017 chip; 1 *PCB board; 1 *Battery Box.)
Advantage :
1. The pcb board prototype kit is tinned, not easy to oxidize, high-strength fireproof, anti-drop material, can be disassembled and assembled repeatedly. After welding, you can power on (3-12V) to see the effect.
2. Electronic components are clearly marked. Even beginners can easily solder successfully. 3 columns of components on the left and right are used to practice soldering, and each column has a test point. There is a ruler on the back of the circuit board for easy measurement of components.
Instruction:
1. Please ensure that all components are in the correct direction and position; and check whether pseudo/float welding.
2.Since the accessories are very small, it is recommended to use a pointed clip to assist welding.
Note:
1.Please check compatibility before purchasing.
2.It is normal for the product color to differ from the image due to the luminous effect.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.