|
Pair Front CV Axle Shaft Set for 2003-2007 Honda Accord 2.4L 60-4218
Description: - New CV Axle Assemblies
- ISO / IATF 16949 certified, direct fit and made from high quality materials to meet orginal specifications
- Built to last - temperature and pressure resistant grease prevents friction and wear
- Premium quality neoprene boots with secure clamps prevent grease leakage and premature boot failure
- When replacing CV Axles in pairs, complete the installation on one side before removing the axle from the other side,otherwise the differential gears may become misaligned which requires the transaxle to be taken apart so the gears can be reassembled.
Spec: Type:CV Axle Assembly Warranty:LIFETIME Location:Front,Left,Right Interchange Part Number:NCV36125,NCV36126 OE Number:44306SDAA01, 44306SDCA01,44305SDAA00, 44305SDCA00 Compressed Length:26.02 inch (Front Left) ; 37.83 inch (Front Right) Inboard Joint Type:Male Inboard Spline Quantity:27 Outboard Spline Quantity:26 Engine:L4 2.4L Quantity Sold:Set of 2 Fitment:
2003-2007 Honda Accord 2.4L OE Number: 44305SDAA00, 44305SDCA00, 66-4218, 60-4218, NCV36126 44306SDAA01, 44306SDCA01, 66-4217, 60-4217, NCV36125 DSK659658 66-4217 66-4218 60-4217 60-4218 Package Included: 2Pcs Front CV Axle Shaft How to Replace a CV Axle: - Find a safe place.
- Remove the axle nuts and hubcaps of the vehicle. Jack the car up, remove the wheel that needs to be replaced with the cv axle, straighten the cotter pin with pliers, and it can be pulled out.
- Remove brake calipers and hub. Loosen the bolts holding the outer tie rod to the steering knuckle and remove the bolts holding the hub to the pillar tower.
- Remove and replace the CV axle. Pry down the CV joint. Use a small pry bar or sturdy flat head screwdriver to pry the axle from the joint. Replace faulty axles, axle nuts, wheels, and twist all fasteners and wheels to factory specifications.
- Perform a road test.
： - Prioritise safety precautions by parking the vehicle on a level surface, engaging the parking brake and wearing appropriate safety gear. This includes gloves and safety glasses. Safety should be a top priority throughout the entire process.
- Utilise the hydraulic jack to lift the front or rear of the vehicle, depending on the axle you’re replacing. Once lifted, secure the vehicle on jack stands to provide a stable working environment.
- Use the lug wrench to remove the wheel on the side where you’ll be replacing the CV joint and axle.
- Start by removing the cotter pin from the castle nut on the ball joint. Proceed to loosen and remove the castle nut. Use a pry bar to carefully separate the ball joint from the steering knuckle. Also, check the signs of bad ball joints when disconnecting suspension components.
- Remove the calliper bolts and hang the calliper out of the way. If necessary, detach the ABS sensor or brake line, ensuring that brake components are appropriately handled during the process.
- Locate and remove the axle nut using the appropriate socket. This is a crucial step in releasing the CV joint and axle from the wheel hub.
- Using a pry bar, gently release the CV joint from the car’s transmission or differential. Pull the axle out from the wheel hub, carefully navigating through any obstacles in its path.
- Insert the new axle into the wheel hub assembly, securing it properly. Pay attention to aligning the splines and push the axle into the transmission or differential, ensuring a snug fit.
- Reattach the ball joint to the steering knuckle and tighten the castle nut.Install a new cotter pin.Reconnect the calliper, ABS sensor and any other components you detached.Tighten the axle nut to the manufacturer’s specifications.Put the wheel back on and lower the vehicle.
 
| Item Specifics |
|---|
| Brand : | CARBOLE | | Placement on Vehicle : | Front, Left, Right | | Fitment Type : | Direct Replacement | | Manufacturer Part Number : | DSK659658 | | Inboard Clip Included : | Snap Ring | | Manufacturer Warranty : | Lifetime | | Transmission Type : | Automatic | | Universal Fitment : | No | | Interchange Part Number 1 : | 66-4217 66-4218 60-4217 60-4218 HO-8167 HO-8176 | | Interchange Part Number 2 : | HO-8-247M HO-8-147M | | Bundle Description : | 2 CV Axle Shafts | | Items Included : | 2x Front CV Axle Joint Shaft Assembly | | Hardware Included : | No | | Number of Inboard Splines : | 27 Teeth | | Grease Type : | Molybdenum Disulfide Lithium Grease | | Input Shaft Connection Style : | Spline | | Feature 1 : | Comfortable Driving | | Feature 2 : | Reduce Abnormal Noise | | Feature 3 : | Stable and Durable | | Fitment : | Honda Accord 2003 - 2007 2.4L Automatic Transmission |
Payment: We accept Credit card, Debit card, Apple Pay, Google Pay and PayPal.
1. We do not offer combine shipping service. You need full amount of each shipping fee and insurance.
2. We will ship Whithin 1days after payment clears.excluding weekends.
3. Additional shipping fee will be charged for buyers from Puerto Rico,Hawaii,Alaska,Guam,the U.S. military address of the United States and the nonnative American address please contact our customer service for the details of extra shipping fee.
1.Please Do Not click "Return this item" in any situation.Because sometimes it will spend more time to resolve the issue for those items needn't to be returned for a replacement after fully communication. Click "Contact seller" via Ebay Message(protected by Ebay),that is the fastest way to solve any problem for you.
2. If you received and incorrect,damaged,defective,or item not as described, contact us for a partial/full refund or replacement on our cost.
3. If you want to return the item, please contact us within 60 days after package received.Return products must also be in its original condition: including box, packaging and all other accessories.
4. Products can be returned within 60 days after receiving it. Hoever, If the products didn't have any problems, buyer should pay for the return shipping cost. It's really important that you love your purchase from us.
1.We fully guarantee customers an exchange or refund within 30 business days of receipt if item DOA (damage on arrival).
Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
2. Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
3. For malfunction products under warranty period, please contact our customer service via EBay Message.
Monday to Friday: 9:30AM - ---17:30PM
|
