Here's How To Put Them Together:

1. Unscrew the bottom half of the clutch, and remove the bottom screw and felt.

2. Attach the top part of the clutch and top felt to the top hi hat cymbal.

3. Turn the cymbal over, and underneath the cymbal, put the felt back onto the clutch.

4. Take the removed bottom screw, and screw it back onto the clutch. Use the top screws to adjust the tightness of your top cymbal.

5. Finally, put the hi hat clutch and cymbal onto the rod of the hi hat stand, and tighten the wingnut at your desired placement. You can use the pedal of your stand to help get the placement just right.

6. When all is said and done, you should have the two felts sandwiching your cymbal in between them, with two screws above the felts for tightness adjustment, and one screw on the bottom holding everything together.


【Rock-solid & Heavy-duty Clutch】-- It is made of high-grade aluminum alloy to ensure years of hard use, sturdy enough to hold any hi-hat cymbals and will fit most hi hat stands. Responsive and easy to fine tune adjustments for the perfect hi-hat setting and feel.
【Standard Hi-Hat Clutch】-- Fits Intermediate Stands with 7mm Pull Rods. Hi-Hat Cymbal Clutch with Adjustable Cymbal Position and Tension and Locking Nut. A cost-conscious alternative to players of every musical genre and skill level.
【Super-dense Felts】-- 2 Felt cymbal protectors and locking metal washers deliver dependable action with just the right amount of "play," whether you take your hats taut or sloshy.
【Reliable Performance & Security】-- Its single-threaded metal locking nut resists unscrewing due to play. This means your hats remain secure as the night rolls along.
【Direct Wing-bolt for Non-slip Secure Settings】-- A jumbo wing nut supplies locking force onto pull rods without torquing your wrist. Designed for every drummer whether you’re gearing up for your next big gig or your next rehearsal!