This listing is for a rebuilt injection pump for a Cummins 4 cylinder diesel 3.9L non turbo engine. We rebuild these in house at Badger Diesel using high quality parts and testing and calibrating everything on our Bosch test equipment. 

We typically have these pumps on the shelf ready to ship same or next day.

Our process is as follows: Pumps are torn down, cleaned up, and inspected for damage. All wear parts are replaced including the metering valve, transfer pump liner and blades, all gaskets, throttle shaft, top cover is reamed out with a steel insert installed to improve wear resistance on your throttle shaft. Then the pumps are reassembled to all factory specs then tested and recalibrated on our Bosch test equipment which means all of our pumps ran for at least an hour prior to leaving our shop.

12volts

76hp @ 2500rpm

High idle at 2725rpm

Calibration code A53L800/3/2725

This is the same pump as a 3042F220, 3042F221, 3042F222, 3042F223, 3925687, 3908674, except this is the 12v version. We can just swap solenoids over if you are needing 24volt. 

Fits the following and more:

Case Industrial 602B
Cummins CPL0591 
Gravely Mower 534C6
International TD12C
International TD7G 
Ingersol Rand 706L
Lull 466B 
Macdon Windrowers 7000
Cummins 4b Power units
Wood chippers

All of our pumps are rebuilt by either the owner Fred who's been doing this for 23 years or Jon who's been rebuilding pumps for 45 years, not a $15/hr trainee. Unlike our competitors flooding the market with cheap chinese parts and Krylon remans we refuse to sell low quality junk just to make a buck. 

 If you have any questions you can call Badger Diesel Monday - Friday 8am to 4pm

!!!!THIS PUMP DOES REQUIRE A $600 CORE DEPOSIT BE PAID OR YOUR OLD PUMPS SENT IN BEFORE WE CAN SHIP THEM!!!

How can I pay the core charge?

1. Send money using paypal - just type or copy " Paypal.me/BadgerDiesel/600 " into your browser and then click "SEND" to pay
2. Call us and provide a credit card over the phone.
3. Send us your paypal address and we'll send an invoice
4. If you would rather not pay the deposit you can send your old one in first. Please let us know if this is what you'd prefer however and we will ask that you wait until we receive your core before you place the order.
*** TYPICALLY WE DO NOT CHARGE THE CORE IMMEDIATELY. WE WILL TAKE THE CREDIT CARD AND PLACE A HOLD ON IT FOR THE CORE AMOUNT. IF THE CORE IS NOT RETURNED WITHIN 3 WEEKS WE WILL THEN CHARGE THE DEPOSIT. IF THE CORE IS RETURNED AFTER 3 WEEKS WE WILL STILL REFUND THE DEPOSIT***

CORE CRITERIA: 
 1. Core must be the same pump number we send you. If different you must call first to make sure if it will be acceptable.

 2.Core must be complete. Whatever you receive from us must be included on your core. If not it will be deducted from the core refund until it is returned.

 3. Cores that have been burned will have to be evaluated on a case by case basis.

 4. Cores with other damage that isn't normal wear and tear such as a broken housing will be deducted accordingly. Please contact us with questions.

 5. Core with seized heads will have a 2/3 core deduction plus the cost of the drive shaft depending on which pump it is.


Since we are a full fuel injection shop we can stand behind what we sell and know what it is we are selling you, not like some of these other sellers that are just buying surplus parts and selling them then when there is a problem they tell you it's not their problem and don't even know how to help you.

Ask the other guys to show you pictures of their shop. These guys are doing this in their barn or garage in a dirty environment and don't even own a test bench to calibrate the pumps when they are done. Fuel injection work MUST be done in a clean environment due to tolerances in the 1-3 micron range. Calibration equipment is where the money is and if it wasn't required to do the job right we would rather have the money in our pocket. 

DON'T BE FOOLED OUR COMPETITORS SELLING INJECTORS WITH INFERIOR CHINESE NOZZLES, REMANUFACTURED NOZZLES OR UNHEARD OF BRANDS OF CHEAP JUNK INJECTORS!!!

 Items will be shipped via UPS. If you need them more quickly please specify and an additional charge may apply to cover higher postage costs.

 

ALL OUR INJECTORS AND PUMPS COME WITH A ONE YEAR UNLIMITED MILEAGE WARRANTY

WARRANTY

 We warranty our products to be free from defects in material or workmanship for 12 months, from the date of arrival. We will repair or replace any product to be defective in material or workmanship that fails during normal and reasonable usage. All failed and related parts must be available for inspection by us. This warranty does not cover improper installation, operator negligence, misuse, neglect, poor maintenance, accidents, troubleshooting or diagnostic time, mileage, towing, down time, loss of profit, cargo damage, or any other consequential or indirect claims. If the failed item has been tampered with in any way the warranty will be void entirely. In the event that you have an improper diagnosis of a pump failure and the item is returned for warranty work and there is nothing wrong with the part there will be a service fee for testing the part. This warranty will cover the cost of returning the replacement unit to you on domestic shipments only. All international customers will have to pay return shipping.