Feature:

1. The measurement circuit is isolated from the incoming signal. Hall‑type current conversion can withstand 30 times the nominal input, prevents instantaneous high current access and burns out the internal components of the sensor
2. The product can isolate the detection signal and the output signal, effectively filter the noise in the signal, greatly improve the signal‑to‑noise ratio and signal stability of the product, and effectively enhance the product's anti‑interference ability
3. The primary and secondary sides of the hole current transmitter are highly insulated and isolated, possess high accuracy, small size, low power consumption, wide frequency response, and anti‑interference characteristics
4. Perforated input, no insertion loss, fixed with standard guide rail and flat screws, convenient to install
5. Suitable for generators, motors, intelligent low‑voltage power distribution cabinets, air conditioners, fans, street lamps, power grid monitoring, motor signal monitoring, railway system signal monitoring industries and other load current intelligent monitoring systems


Specification:

Item Type: AC Current Transmitter
Material: ABS
Power Supply: DC24V
Installation Method: Standard rail + flat screw fixation
Product Use: Used to measure AC current, especially for power frequency 50Hz sine wave AC current
Rated Current: AC0-50A
Rated Output: DC4-20mA
Load Capacity: Voltage Output: 5mA; Current Output: 6V
Accuracy: 0.5%
Overload Capacity: 30 Times the nominal input
Isolation withstand Voltage: 2.5KV/50Hz, 1Min
Offset Voltage: ≤10mV
Temperature Drift: ≤500PPM/℃
Linearity: 0.1%
Frequency Bandwidth: 20-5KHz
Current Consumption: <15mA+ output current
Response Time: <200ms
Working Temperature: -109℃~+70℃
Storage Temperature: 25℃~85℃


Package List:

1 x AC Current Transmitter


Note:

Please do not use 250ohm or 500ohm to ‑20mA output version of the transmitter to get 0‑5V or 0‑10V, this is a completely wrong method, you cannot get 0‑5V or 0‑10V signal, and it will make transmit becomes overheated or damaged.



1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. 

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

https://image-us.chengykj.com/upload/third_resource/image/feedback.jpg


We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg

On 07-Feb-2026 at 09:19:19 GMT, seller added the following information:

Datacaciques