This soldering station is an upgraded version of our green LED display model, featuring significantly faster heating and cooling speeds—melting solder in just 5 seconds.
Special Note: New heating elements may trigger an error and emit a beeping sound upon installation. Ignore this; it will resolve within 2-3 minutes. All new heating elements require an adaptation period. This issue does not occur with aged or secondhand elements.
Please use the handle supplied with this unit. We assume no liability for damage to the control board caused by unauthorized modifications or handles from other stores. Thank you for your understanding.
Dimensions: 138x88x38mm
Weight: Approx. 0.76kg without soldering iron stand; approx. 0.95kg with stand
Operating Voltage: 100-240V
Power Cords: EU, US, and CN standards included (CN standard supplied by default)
Temperature Range: 150-480°C
Basic Operation
1: Rotate the encoder to adjust temperature. Slow rotation adjusts by 1°C per increment; fast rotation adjusts by 5°C per increment.
2: Briefly press the center encoder button to enter sleep mode. Any encoder movement or handle vibration will exit sleep mode.
3: Double-click the center encoder button to enter enhanced mode. Any encoder movement will exit enhanced mode.
4: In sleep mode, hold the center button to power off. Power on by reinserting power or briefly pressing the center button.
5: Enter sleep mode after prolonged inactivity (default 5 minutes). Enter soft shutdown mode after extended inactivity (default 30 minutes).
6: Hold and turn knob left once to enter shutdown time adjustment (units: minutes). Short press to exit after adjustment.
7: Hold and turn knob right once to enter sleep time adjustment (units: minutes). Short press to exit after adjustment.
Long press to adjust temperature parameters and calibrate temperature. Default settings are generally accurate; calibrate with a thermometer if desired.
Completely redesigned with a new design philosophy and program architecture. Achieves precise temperature control and instantaneous recovery while significantly reducing control board power consumption—the control board no longer overheats.
Comes standard with one T12-K knife-tip heating element. Owners of commonly used soldering stations should purchase spare heating elements.
