Wireless RF433MHz Kinetic Switch Smart Home Light Switch Self Powered No battery Need Module Wall Panel Transmitter For LED ON OFF
Description：
1.It is 433mhz and uses special code.The wall switch cannot work with other receivers in our store.It can work with this receiver only.
2.It is kinetic switch,no battery need.Every time you pressed the wall switch button,the receiver will catch the signal and work.
3.The receiver has fuse,for safety.
4.One receiver can only be controlled by 3pcs wall switches.
5.The wall switch and receiver are a set.They need to work together to control one lamp.You need to buy them both if you want to control lights on off
How to connect:
The input and output power cannot be reversed.The power should be AC 85-245V
Highlights:
1.Kinetic No battery Need Wall Switch
--You donot need to buy a battery more.Save cost and better for environment.
--Energy cycle,Conversion of kinetic energy to electrical energy.
2.Receiver has fust,more safety(F10AL250V)
--When your electrical appliances are short-circuited or the voltage is too high, this insurance will automatically break, and then cut off the power to protect your electrical appliances and life safety;
--You only need to replace another insurance, the receiver can continue to use.
3.Strong rf signal
--Can pass walls,the longer distance,the signal weaker
4.Family Control
--One 2buttons wall switch can control two receivers at the same time.
--One receiver can be controlled by almost 3pcs wall swtiches.
5.Waterproof
--You can use it in bathroom or kitchen
Product Application Area
Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on
Remote control Electric curtain \ Fan \ Lamp \ LED light \ bulb \ ventilation device \ Signal transmission
Remote control humidifiers, microwaves, coffee machines
Remote control Taking Care for the elderly, children
How to set up
Please connect with power first.
1.Press and hold the eceiver learning button for about 3-5 seconds,you will see the blue indicate light,release
2.Press wall switch button twice,the indicate will blink twice,
3.Press the receiver learning button once.
4.success.
Specification：
Relay Receiver Board Parameter
Working voltage : AC 85V~240V
Max current : 10A
Max load : 2200W
RF frequency : 433MHz
Working temperature : -30~+80
Receiving Sensitivity : >97dbm
Amount of storage remote controls : 3 pieces
Support encoding : 1527 Leaning code
RF Operating mode : ASK superheterodyne wireless reception
Receiving range : Open space is more than 50 meters
Type of Fuse:F10AL250V
Size:60*42*28mm
Self-Powered Wall Switch Transmitter Parameter
RF frequency : 433MHz
Size:86*86*mm
Battery:No Battery Needs
Remote distance : up to 50m (theoretical distance)
Screw: Include
double-sided tape: Include
Package Includes:
Switch Panel/ Receivers or set of switch panel & Receiver Per your choice
User manual