Description

BriskHeat's Hot Air Gun Curing System is a portable, lightweight, and self-contained hot air gun solution. Ideal for small spot composite cures such as click studs, with a 1 to 2 in (25 to 51 mm) diameter cure area.i do not have the metal cradle that holds the heat gun during cure but they are available .Includes hot air gun and temperature control High-limit temperature protection Eight-segment ramp/soak control Part Number BRISKAIRSP-1 Skip to the end of the images gallery Skip to the beginning of the images gallery Specifications Hot Air Gun Temperature Setpoint:Factory set to 350F (177C)* (controller may need programming , a simple  step by step, controller manual is also available on line).Wattage:1500 watts Airflow:14 cfm (0.4 cmm) Over Temperature Protection:Includes high-limit Type-J thermocouple mounted in air stream * Other temperatures available upon request Temperature Controller Temperature Control:Automatic tuning of PID parameters Temperature Display:Dual display shows set-point and actual temperature (programmable to either F or C) Accuracy:1 least significant digit Alarms:Visual and audible alarms; 14 programmable alarm types Input Voltage:100-300 VAC, 50-60 Hz Maximum Amp Load:30 amps Sensor Input:Two Type-J thermocouple sensors inputs - one is for control and the other is for high-limit protection Security:Program security lock levels Power Cord:6 ft (1.8 m) long with 3-prong grounded plug (NEMA 5-15P)

This machine has not been used on a cure, bought for specific contract that did not happen .Retail is $6700 (see pic) Just the controller is close to 3k. Comes in a nice Pelican roller case. I do not have the operating manual, but it is available online.