A - INCLUDED CASES 1. Products used in accord with normal use conditions but found to have production or material errors will be repaired or if this is not possible replaced immediately under lifetime warranty. 

B - EXCLUDED CASES Products used under any of the conditions listed below are excluded from the warranty scope and cannot be replaced with new ones: 

1. Products used outside the intended purpose or instructions of use; 

2. Products deformed or broken due to excessive forcing, pipe attachment or hammer impact; 

3. Products whose original form is altered by the user by stoning, grinding, perforation or welding; 

4. Products which lost their function due to being left in dusty, moist or muddy environments without necessary protective maintenance after use; 

5. Products which became rusted or corroded due to being stored in unsuitable, moist environments for extended periods of time; 

6. Products which are used for a long period of time or which have completed their useful life and accordingly have become old, worn out and deformed. 

RULES FOR SAFE AND CORRECT USE OF HAND TOOL A - PRACTICAL RULES: 

1. Make sure size of the wrench is appropriate for the work piece. 

2. Make sure the tool is positioned correctly during use. 

3. Frequently control the tool. Replace worn or damaged tools.

 4. Use the tool in accord with instructions of use. Do not place too much load on the tool. 

5. Especially beware of the point that the impact surface of a hammer must be larger than the impacted surface. 

6. Always use appropriate accessories for pneumatic tools. (Also make sure the pneumatic system is properly lubricated.) 

7. Use personal protection equipment appropriate for work conditions. 

8. Always make sure to lock lids and moving parts of wheeled set cabinets before moving them. 

9. Make sure to lock brakes of the wheeled set cabinets before working on them. 

10. Use VDE certified products made in accord with TS EN IEC 60900 Standard in high voltage work environments. 

11. Make sure to dry and lightly lubricate tools after use in moist and wet environments.

 B- ACTIONS TO AVOID: 

1. In case of use with extensions like pipes, etc. do not exceed the specified torque value (especially in case of all wrenches). 

2. Do not use any tool outside of its intended purpose (e.g. do not use a screwdriver as a lever or a chisel). 

3. To not force the tool (e.g. wrenches and screwdrivers) by using excessive force (by pipe attachment or hammer impact). 

4. Never use the tool to hit another object harder than the tool (e.g. hammer and chisels). 

5. Do not alter the tools (in form or partially). 

6. Do not use metric sized wrenches on inch sized bolts or vice-versa. 

7. Do not use worn out or faulty tools. 

8. Do not leave multiple drawers open when using the wheeled set cabinet and do not move the cabinet while the drawers are open. 9. Do not perform grinding, stoning, welding, etc. on the tool in order to improve its function. 

10. Do not expose the tool to conditions that might result in loss of paint or coating during use. Otherwise corrosion resistance of the tool will be affected. 

11. Never use VDE certified products with damaged or worn isolation or handle in high voltage work environments. 

12. Never attempt to dismantle the internal assembly of the tester. Testers are suitable for use in the 110 – 250 VAC operation range. 13. Always use the right tool for the right job and follow the conditions and rules of