ETCR 2000+ Clamp Earth Resistance Tester

Introduction：

ETCR Clamp Earth Resistance Tester is widely applied in ground resistance measurement, loop resistance measurement in fields such as electric power, telecommunications, meteorology, oil field, architecture and industrial electrical equipment, etc. When measuring ground system with loop, there is no need to disconnect the ground wire without auxiliary electrode, which means safer and faster. ETCR Clamp Earth Resistance Tester can measure the ground fault which can not be measured by traditional method, can apply in the occasion where traditional methods are unworkable; ETCR Clamp Earth Resistance Tester measures the integrated value of ground resistance and resistance lead.

Technical Specifications

Function

Ground resistance test, Loop resistance test

Power Supply

6VDC 4 PCS of AA Alkaline batteries

Resistance Range

0.01-1200Ω

Resistance Resolution

0.001Ω

Highest Resistance Accuracy

±1%±0.01Ω

Data memory

99 Sets

Alarm Threshold Setting Range

Resistance: 1-199Ω

Alarm Sound and Light

“Beep-beep-beep” alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold.

Interference Signal Recognition

“Beep-beep-beep” tone, NOISE symbol blinking

Working Temperature and Humidity

-20℃-55℃；20％RH-90％RH

LCD Screen

4 Digits LCD display, Screen L×W: 47mm×28.5mm

Clamp Size

65mm×32mm

Clamp Opening Extent

32mm

Tester Weight

1160g (With batteries)

Clamp Dimension

L×W×T: 285mm×85mm×56mm

Protection Level

Dual Insulation

Structural Feature

Clamp CT

Shifting

Automatic shifting

External magnetic field

＜40A/m

External electrical field

＜1V/m

Single measurement time

0.5 second

Resistance measurement frequency

＞1KHz

Measured current frequency

50/60Hz Automatic measurement

Low Battery Indication

Low battery symbol displays when battery is lower then 5.3V

Memory Full Indication

MEM symbol blinks when all 99 sets memory is full

Over Range Indication

Out of range indication “OLΩ”, “L0.01” or “OL A”

Auto Power-off

5 minutes after Boot up

Power Consumption

Max 50mA either in booting up or normally working, Continuously working for 30 hours

RS232 Interface (Optional)

The data stored in the meter are uploaded to the computer through RS232 interface and data wire, Then generate report files

Safety Provisions

IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Accessories

Meter: 1 piece, Test ring: 1 Piece, Meter Suitcase: 1 Piece

Shipping Policy

We will send out the item within 2-3 days through DHL/EMS/FEDEX /UPS/SPEEDPAK/CHINA POST to the below countries:

Belgium, Netherlands, Luxembourg, Italy, Germany, France, United Kingdom, San Marino;

Austria ,Denmark ,Finland ,Greece ,Ireland ,GUERNSEY ,JERSEY ,Norway ,

Portugal , spain , Sweden , Switzerland;

Bulgaria,Cyprus,Estonia,Latvia,Lithuania,Malta,slovakia,slovenia;

Czech Republic, Hungary, Poland, Romania,.

Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore , Bruniei ,Taiwan , Macau, Indonesia,

USA, Canada

We will send tracking number to your eBay email within 1 day after sending out your item

We will mark the item at the very low value, so that you do not need to pay for the tax or pay a little tax.

Payment policy:

We accept Paypal only.

Payments must be finished within 5 working days after bid, otherwise, Unpaid Item dispute will be reported to eBay.

Refund &Return policy

We take all the responsibility during delivery. If you do not receive your item, we will refund you the full money or send you a new item according to your request.

We can accept the return item within 60 days after the buyer receives it. Once we receive the return item, then we will refund you full money.

Feedback Policy

We will very appreciate you give us positive feedback ASAP.  If the item you got in any problem, PLS don’t hesitates to contact us.  We will do our best to help solve the problem