Features :

Easy to install : The solar light can be installed by yourself on wall or pole. Maintenance-free, operation without wiring or trench. Recommended installation height is 3 to 5 meters. Please activate it before installation by turning on the solar light switch.

Environment Friendly & Save Money : The electricity generates from solar energy, one of the cleanest energy sources, which does not pollute the environment and help you to save electricity costs.

Convenient to Use: You can use the remote control to set timing and adjust brightness; Dusk-to-dawn mode automatically turns lights on and off based on ambient brightness; Radar sensing for precise detection, avoiding unnecessary illumination.

Motion Sensor + Light Control + Remote Control : When motion is detected, the street light becomes 100% brightness mode within 1 second. If no movement is detected, it will revert to 30% brightness energy saving mode; Light control means automatically adjust the light ( lit at dusk, turn off and charge at dawn ); The remote control is for setting 2/3/4 hour timer mode.

High-power LED chip : with its 120° ultra-wide-angle lighting, high brightness, low power consumption.

Strong and Durable: Waterproof and dustproof integrated casing. With IP65 waterproof rating and lightning protection, the light can withstand various outdoor environments and weather conditions. Working temperature is between -16.7°C and 60°C.

Widely Use : Outdoor wall or pole in Plaza, Park, Garden, Courtyard, Street, Walkway, Pathway, Campus, Farm, Perimeter Security etc…

Specifcations :

Material: ABS+PC

Power: 150W/300W/450W/600W

LED chip tpye: 5730SMD

Light source:  LED

Color temperature:  5000K-6000K(cool white)
Dimmable: yes

Control system: Light control, remote control, sensor control

Sensing angle: 120 degree

Recommended installation height：3-5M

Waterproof : IP65

Power supply : built-in Lithium iron phosphate battery

Voltage : 6

Charging time: ≥6 hours

Fully charged lighting duration: 2 rainy days

Timmer: 2/3/4 hours

Solar panel material: A grade Polycrystalline

Instructions:
1. Press the green button, when the sensor flashes red once, the solar street light is activated.

2. After activation, it will absorb solar energy during the day to store electric energy. Sensor will continuously flash red during charging, if the red light does not flash, repeat step 1 for activation.

3.When the power is sufficient, press the red button of the remote control, and then select working mode as needed.

4. Before the first time using, please turn on the street light switch and charge it for 6-8 hours under direct sunlight.

5. Please choose a position without any shelter for enough sunshine and fully exposure.

Package Includes:

1 * LED Solor Street Light+Remote Control+Pole+Mounting Screws