SEAFLO

1100 GPH SEAFLO 06 Series Automatic Bilge Submersible Pump 12V

 All-in-one pump and float switch.

No additional float switch required.

Pump turns on when water level rises and shuts off when water is removed.

Will not pump oil-straight motor oil that enters the bilge will not turn the pump on

Snap-off strainer for easy cleaning

Anti-fouling impeller

Full Details 

This Compact, automatic, fully submersible electric pump 18 AWG, 1m long Lead

NB. These pumps are not intended for continuous use.

Built-in float switch! (No separate float switch is needed)

Equipped with built in electronic controlled reed sensor system for easy fully automatic operation

No power use until pump is activated by internal float switch (when water level rises)

Compact, efficient, long-life motor

Rustproof and corrosion resistant Stainless-steel shaft

High-impact durable plastic housing

Quick release strainer for easy maintenance cleaning

Extremely efficient, very low current draw and offer high capacity output

Water cooled long-life motors

Ignition protection to protect the pump against high current

Water/moisture tight seals

Silent and vibrationless operation

Anti-air lock protection

Will not burn out when run dry

Integrated float switch TEST button at rear of unit

Can be used with switch panel for manual override

Includes comprehensive user manual with installation instructions and wiring diagram

 Spec’s

Voltage: 12V DC

Flow capacity: 1100 Gallons per hour (4164 Litres per hour) 

Max. delivery head: 4.0 metres (height of vertical water flow up pipe)

Current draw: 5 Amp @12v

Hose Outlet: 29mm 

Dimensions: Length 145mm (5.71") x Width 83mm (3.27") x 103mm (4.05")

3-wire lead, approx. 1m long

CE APPROVED

 Use's

Most often used in boat hulls / bilges

Bait tanks, Ponds, pools, spas, Etc

Other applications where you have to remove water from

Note: These pumps are designed for intermittent use only, NOT designed for continuous use