Carbonadi Special Adhesive Glue Gluten Colle Adhesive Carbon

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.



Carbonadi - glue

Special adhesive to glue the Carbonadi engine protectors.

Approved up to 250 ° C

70 ml, lockable tube.

Up to 4 protectors.

Assembly instructions are included. (See pictures)

Special adhesive to Bond the Carbonadi - motor protector.
Ad to 250 ° C.
70 ml blosable tube.
Sufficient for 4 to protector.
installation Instructions are included. (See Pictures !!!)

Colle Spéciale Pour Coller Les Carbonadi - de Protection of the Moteur.
Admis à 250 ° C.
70 ML You tube Pouvant être Fermé.
Suffisant pour 4 à protector.
Les Instructions d'Alstlung Sont incluses.

Speciale Adesivo by legare I Carbonadi - proticoni Motors.
Ammesso A 250 ° C.
70 ml tubo Richiudibile.
Sufficient per 4 A Protettori.
Le Istruzioni di Installazione Sono included.

Adhesivo Especial Para Unir Las Carbonadi - protector de motor.
Admitido A 250 ° C.
70 ML Cerrable Tubo.
Suficiente para 4 A Los Protectores.
Las Instrucciones de Instalación Están Incluidas.


 Assembly instructions:


- Clean the original lid thoroughly (NOT With brake cleaner or motor cleaner! , only use fuel spirit or acetone)

- the protector PREVIOUSLY Check for fit (protectors with glue residues are not removed)

- Apply the special adhesive to the original lid. Please not too close to the edge and not too much because the protectors are very fit.

- tighten the protector and fix 24 hours with adhesive tape 24 hours

- Inbert after 24 hours, complete hardening after 48h (at 20c)
Special adhesive to glue the Carbonadi engine protectors. Special adhesive to Bond the Carbonadi - motor protector. installation Instructions are included. (See Pictures !!!) Colle Spéciale Pour Coller Les Carbonadi - de Protection of the Moteur. Speciale Adesivo by legare I Carbonadi - proticoni Motors. Adhesivo Especial Para Unir Las Carbonadi - protector de motor. - Clean the original lid thoroughly (NOT With brake cleaner or motor cleaner! , only use fuel spirit or acetone) - the protector PREVIOUSLY Check for fit (protectors with glue residues are not removed) - Apply the special adhesive to the original lid. Please not too close to the edge and not too much because the protectors are very fit. - tighten the protector and fix 24 hours with adhesive tape 24 hours - Inbert after 24 hour
Herstellernummer 234253
Marke Markenlos
EAN 4011231822985