The hammer crusher is a device that uses a high-speed rotating hammer head to impact on and crush materials. It is widely used in the industries of mining, building materials, chemical engineering and so on, and can perform intermediate and fine crushing operations on various materials such as ore, coal and limestone.

Parameter:

Voltage: 220V
Power: 4KW
Screen mesh: 10mm (0.394")
Size of feeding inlet: 25cm*19cm(9.84"*7.48")
Size of discharging outlet: 25cm*25cm(9.84"*9.84")
Maximum fed particle size: 15cm(5.91")
Discharged particle size: ≤10mm(0.394")
Processing capacity: 1 ton/h
Motor rotating speed: 1440r/min

Feature:

Sealing design of feed inlet
Fully sealed design, no dust pollution.Transmission parts are equipped with protective facilities, achieve smooth operation and low noise.

Crushing chamber
Strong and durable, the use of high manganese steel hammer, relying on high-speed rotation of the rotor, so that the hammer with splitting force to the material for rapid crushing.

Protective control box
Ensure that the equipment can be stopped promptly in case of emergency to avoid or mitigate possible damage to people, machinery or ongoing work.

The locking nut and the feed lever
The locking nut is an important component for opening or closing the crushing chamber. By lifting the lever, materials can enter the crushing chamber.

Customizable mesh size
The size of the discharge depends on the size of the machine is equipped with 10mm. If other sizes are required, they can be customized.

Operating Process:

1. Power on: Connect the power cord to the air switch, turn on the power switch of the control box and check if the control box indicator light is displaying normally.
2. No-load trial operation: Press the green start button on the control box to start the equipment and conduct no-load operation. Observe whether the equipment runs smoothly, and whether there are any abnormal sounds, vibrations and other situations. If there is any abnormal situations, immediately press the red stop button, and stop the machine for inspection and troubleshooting. The no-load operating time is generally 3-5 minutes.
3. Material feeding and crushing: After the no-load trial operation is normal, slowly and evenly feed the materials into the feeding inlet. The feeding speed should be matched with the production capacity of the equipment to avoid the phenomena that due to the too fast feeding, the equipment is overloaded, the crushing effect is affected, and even the equipment is damaged.
4. Adjustment of the discharged particle size: If the discharged particle size needs to be adjusted, the screen plates with different pore diameters can be replaced in the equipment stop state. The screen mesh of the machine is 10mm. When the screen plate is replaced, the power supply should be turned off, the equipment completely stops, and then the replacement operation can be conducted to ensure the safety.
5. Machine stop operation: After completing the crushing operation, stop feeding the materials. After the materials in the machine shell are basically crushed and discharged, press the red stop button to stop the equipment. Then turn off the power switch of the control box.

Scope of application:

Applicable to coal, electricity, chemicals, building materials, geological exploration and teaching and research industries and sectors.Dry or contain less than 20% moisture in coal, ore, rock or other medium hardness material.

Note:

1.Due to different batches, there are slight differences in the colors of the various components of the machine.
2.This machine has no plug and needs to be connected to the air switch for use by the customer (we have a video of the wiring, if you can't wire it, you can contact us for a video reference)　
3.During machine operation, hands, clothing, and tools should be kept away from moving parts to avoid touching them with hands and prevent harm to the human body.

Item Number: 021246