4pcs Pneumatic Exhaust Muffler, 3/8" NPT Sintered Bronze Muffler Air Fittings
What is this?
Air exhaust muffler is mainly used to reduce the output pressure of compressed gas, thereby reducing the noise when the gas is discharged. Not only can it be used for air compressor noise reduction, it can also be used for cylinders, valves, crankcases, gearboxes, oil tanks, fans, compressors, vacuum pumps, throttle valves, pneumatic tools and other systems that require mufflers to clean exhaust and reduce.
What will I get?
Pneumatic Muffler
Material: Brass
Thread Specification: 3/8" NPT
Total Length x Thread Length x Width Across Side: 16x9x18mm/0.6x0.35x0.7 inch
In the Package: 4 x Pneumatic Exhaust Muffler
Are there any advantages of the product?
pneumatic muffler fittings is made of brass, it is resistant to high pressure, not easy to rust, corrosion-resistant, good high-temperature ductility, low magnetic permeability, strong and durable, long service life. Threaded pipe fittings are made of precision machining, with clear and deep threads, tight and anti-slip, good sealing, leakage prevention, prominent nuts, not easy to be mixed with oil, easy to clean and maintain.
How to use it?
1.Thread Installation: Screw the muffler end directly into the exhaust port of valves, cylinders, or compressors.2.Tighten Securely: Use a wrench to ensure a snug fit without over-torquing (avoid damaging threads).
What should I notice?
Thread Compatibility: Confirm your equipment port size before installation.
Air exhaust muffler is mainly used to reduce the output pressure of compressed gas, thereby reducing the noise when the gas is discharged. Not only can it be used for air compressor noise reduction, it can also be used for cylinders, valves, crankcases, gearboxes, oil tanks, fans, compressors, vacuum pumps, throttle valves, pneumatic tools and other systems that require mufflers to clean exhaust and reduce.
What will I get?
Pneumatic Muffler
Material: Brass
Thread Specification: 3/8" NPT
Total Length x Thread Length x Width Across Side: 16x9x18mm/0.6x0.35x0.7 inch
In the Package: 4 x Pneumatic Exhaust Muffler
Are there any advantages of the product?
pneumatic muffler fittings is made of brass, it is resistant to high pressure, not easy to rust, corrosion-resistant, good high-temperature ductility, low magnetic permeability, strong and durable, long service life. Threaded pipe fittings are made of precision machining, with clear and deep threads, tight and anti-slip, good sealing, leakage prevention, prominent nuts, not easy to be mixed with oil, easy to clean and maintain.
How to use it?
1.Thread Installation: Screw the muffler end directly into the exhaust port of valves, cylinders, or compressors.2.Tighten Securely: Use a wrench to ensure a snug fit without over-torquing (avoid damaging threads).
What should I notice?
Thread Compatibility: Confirm your equipment port size before installation.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.
4pcs Pneumatic Exhaust Muffler, 3/8" NPT Sintered Bronze Muffler Air Fittings
What is this?
Air exhaust muffler is mainly used to reduce the output pressure of compressed gas, thereby reducing the noise when the gas is discharged. Not only can it be used for air compressor noise reduction, it can also be used for cylinders, valves, crankcases, gearboxes, oil tanks, fans, compressors, vacuum pumps, throttle valves, pneumatic tools and other systems that require mufflers to clean exhaust and reduce.
What will I get?
Pneumatic Muffler
Material: Brass
Thread Specification: 3/8" NPT
Total Length x Thread Length x Width Across Side: 16x9x18mm/0.6x0.35x0.7 inch
In the Package: 4 x Pneumatic Exhaust Muffler
Are there any advantages of the product?
pneumatic muffler fittings is made of brass, it is resistant to high pressure, not easy to rust, corrosion-resistant, good high-temperature ductility, low magnetic permeability, strong and durable, long service life. Threaded pipe fittings are made of precision machining, with clear and deep threads, tight and anti-slip, good sealing, leakage prevention, prominent nuts, not easy to be mixed with oil, easy to clean and maintain.
How to use it?
1.Thread Installation: Screw the muffler end directly into the exhaust port of valves, cylinders, or compressors.2.Tighten Securely: Use a wrench to ensure a snug fit without over-torquing (avoid damaging threads).
What should I notice?
Thread Compatibility: Confirm your equipment port size before installation.
Air exhaust muffler is mainly used to reduce the output pressure of compressed gas, thereby reducing the noise when the gas is discharged. Not only can it be used for air compressor noise reduction, it can also be used for cylinders, valves, crankcases, gearboxes, oil tanks, fans, compressors, vacuum pumps, throttle valves, pneumatic tools and other systems that require mufflers to clean exhaust and reduce.
What will I get?
Pneumatic Muffler
Material: Brass
Thread Specification: 3/8" NPT
Total Length x Thread Length x Width Across Side: 16x9x18mm/0.6x0.35x0.7 inch
In the Package: 4 x Pneumatic Exhaust Muffler
Are there any advantages of the product?
pneumatic muffler fittings is made of brass, it is resistant to high pressure, not easy to rust, corrosion-resistant, good high-temperature ductility, low magnetic permeability, strong and durable, long service life. Threaded pipe fittings are made of precision machining, with clear and deep threads, tight and anti-slip, good sealing, leakage prevention, prominent nuts, not easy to be mixed with oil, easy to clean and maintain.
How to use it?
1.Thread Installation: Screw the muffler end directly into the exhaust port of valves, cylinders, or compressors.2.Tighten Securely: Use a wrench to ensure a snug fit without over-torquing (avoid damaging threads).
What should I notice?
Thread Compatibility: Confirm your equipment port size before installation.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.