eBay

Induction Heater ZVS 3000W Module w/ Power Supply DIY Induction Heating Furnace

Application

DIY small iron and steel parts for quenching, annealing heat treatment, melting point below 1500° C metal smelting ( Graphite crucibles),

CNC Tool Heating, small electromagnetic furnace, etc.

Suitable for household low-power DIY melting furnace.

Gold, silver, copper and other non-ferrous metals can not be heated directly. Graphite crucibles should be arranged to be heated in crucibles.

https://youtu.be/nYkPaKhdbDo

https://youtu.be/aduIgxkLJ8s

Induction Heater Specs

Condition: Brand New

1. Size: 120*265*110 (unit: mm); Copper Coil: ID 60mm

2. Working voltage: DC 53.5V

3. Maximum operating voltage:DC 53.5V

4. Maximum operating power: 3000W (Maximum)

5. Maximum working current: DC53.5V 50A Rated, DC53.5V 56A Peak (Maximum);

Peak power consumption will cause high heat generation, and it is not recommended to run at peak power consumption for a long time.

6. If the heater not to work, Please turn off the power supply and extend the heater service life.

7. When the current of the power supply reaches 57A, the voltage will drop to 45V to prevent power overload.

Power Supply Specs

Condition: USED(9/10 new), But in good condition and performance

The shell is made of aluminum, which is very soft and easy to leave scratches and slight bumps on the surface.

Input AC 100-120V; 50/60Hz; 17A Output= DC 53.5V 25.2A 1348W

Input AC 200-240V; 50/60Hz; 17A Output= DC 53.5V 56A 3000W

LxWxH=35x9x4.5cm

Weight=1.7Kg

3000 watts of output power need to be connect to AC 220V

Package Included:

1x 3000W Induction heater module

1x Copper coil (Inner diameter 60mm/2.36inch)

1x Mini water pump

1x 12V 3A adapter (US or EU Plug)

1x 2M Water pipe

1x DC 3000W PSU (when AC 220V Input)

1x DC Breaker switch

1x DC 100A Ammeter

1x Ceramic cover

1x Graphite crucible

(Does not contain AC power cord and cables, recommend 1.5mm² cables or above standards）

Not accept P.O.BOX address