Light Cure Adhesives - Instructions for Use and Safety

WARNING AND PRECAUTIONS

• Composition: Contains acrylate monomers which may cause allergic skin reactions or eye/skin irritation in sensitive individuals.

• Handling: Always wear gloves and avoid contact with eyes and skin.

• Eye Protection: Use appropriate eye protection when operating the curing light.

FIRST AID

• Eye Contact: Immediately flush with plenty of water and seek medical attention if irritation persists.

• Skin Contact: Wash affected area with soap and water. Seek medical attention if irritation persists.

STEP-BY-STEP PROCEDURE

1. Tooth Preparation

   • Rinse and isolate the teeth

   • Dry thoroughly with oil- and moisture-free air

2. Acid Etching

   • Apply etching gel for 30-60 seconds according to product instructions

   • Rinse thoroughly

3. Placement and Curing

   • For Occlusion: Apply blue glue to the model or teeth and cure for approximately 20 seconds

   • For Band Bonding: Apply glue to band, pre-cure for 2 seconds, remove excess material, then complete curing for about 20 seconds

STORAGE AND SHELF LIFE

• Store in a cool, dry place (2-27°C / 35-80°F), away from light, heat, and eugenol-containing products

• Shelf life: 24 months. Please refer to the expiration date on the package

• Use at room temperature (20-25°C / 68-77°F)

• Rotate inventory to ensure optimal shelf life

VALIDITY

• 24 months from production date. Detailed information available on package