4-Side 1300W 156000LM 9005 LED Headlight Bulb Conversion Kit Hi or Lo Beam 6000K
Note:Pls check the plug type of your vechicle when you buy,thank you!
★Plug Type: 9005/HB3, High or Low Beam Single Beam
★Power(per set): 1300W/Pair
★LED Type (each bulb): COB Chips
★Luminous Flux: 156000LM/pair
★Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
★Color Temperature: Pure White 6000K
★Protection: IP68 rated water and dust seal, over 50000hrs lifetime
★Beam Angle: 270 degree@low beam, 360 degree@high beam
★Material: Aviation 6063 aluminum profile
★Operating Temperature: -40-80 degree Celsius
★Usage: headlight,fog light
★(2pcs/set) 9005 High or Low Beam LED headlight conversion kit
★Latest LED chip light source, 4 luminous faces(270/360 degree) no blind zone
★Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
★Xenon white light reflect road paint/signs better to show clearer road situation during night driving
★270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
★All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
★Built-in constant current CPU, instant full brightness without start-up relay
Two-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2.High speed mute fan (12000R/Min),high Air flow for faster cooling rate
Package Included:
2x 9005 LED headlight bulbs
(Packaged with original manufacturer Box)
Automotive LED headlamps advantages:
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable. Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
FREQUENTLY ASKED QUESTIONS OF LED
1.both side could not work?
please turn around the plug (swap the polarity) and try again
2.One side could not work?
1)please turn around the plug (swap the polarity) of the defective bulb and try again
2)please exchange the bulbs from side to side and see if the problem could solve
3)Please check your connection and fuse
4)If still could not help, please contact our customer service, we will get back to you within 24 working hours
3.both side flicker/interference/error light?
Pls kindly noted that your car need a resistor Cancelers Decoders, you can contact our customer service for help
4.My bulb type is H7, but the one you sent could not fit?
Pls kindly noted that your car need a bulb holder to lock the bulb, you can get one from ebay according to you vehicle model
5.My bulb type is H1, but there is only one clip on my bulb and the one you sent has two clip
Pls kindly noted that different cars have different connection way, which some have both positive and negative electrode, while some just have positive electrode but not negative. if there is just positive electrode but not negative, please connect the positive side, as for the negative wire, please connect to the car's metal shell.
6.the bulbs is loss and it could not fit(H8/H9/H11/9005)
Please put the bulb in the bulb assembly, and make sure to rotate the bulbs in the socket by clockwise, only by this way can install the bulbs, if you just put it in the socket, cannot stable the bulbs.
7.the bottom of the bulb is too big and it could not fit
For some special cars, you need to make a hole on the waterproof/dust cover and let the fans come out, and in this way will solve the radiating problem.
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable. Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
FREQUENTLY ASKED QUESTIONS OF LED
1.both side could not work?
please turn around the plug (swap the polarity) and try again
2.One side could not work?
1)please turn around the plug (swap the polarity) of the defective bulb and try again
2)please exchange the bulbs from side to side and see if the problem could solve
3)Please check your connection and fuse
4)If still could not help, please contact our customer service, we will get back to you within 24 working hours
3.both side flicker/interference/error light?
Pls kindly noted that your car need a resistor Cancelers Decoders, you can contact our customer service for help
4.My bulb type is H7, but the one you sent could not fit?
Pls kindly noted that your car need a bulb holder to lock the bulb, you can get one from ebay according to you vehicle model
5.My bulb type is H1, but there is only one clip on my bulb and the one you sent has two clip
Pls kindly noted that different cars have different connection way, which some have both positive and negative electrode, while some just have positive electrode but not negative. if there is just positive electrode but not negative, please connect the positive side, as for the negative wire, please connect to the car's metal shell.
6.the bulbs is loss and it could not fit(H8/H9/H11/9005)
Please put the bulb in the bulb assembly, and make sure to rotate the bulbs in the socket by clockwise, only by this way can install the bulbs, if you just put it in the socket, cannot stable the bulbs.
7.the bottom of the bulb is too big and it could not fit
For some special cars, you need to make a hole on the waterproof/dust cover and let the fans come out, and in this way will solve the radiating problem.
If the problem you meet is not on above or the answers cannot solve the problem, please feel free to contact us through eBay message, we will try our best to help you solve the problem and definitely won’t let your interests to be damaged. So anything please keep in touch first, I believe that everything could be solved by communication.
