QIACHIP Mini Wireless Remote Control Switch DC 6V 12V 24V 1 Channel RF Relay Latched Switch for LED Light Car Battery Anti-Leakage Retrofit,Access Control


Product Details

  • Package Dimensions : 4.84 x 4.41 x 1.1 inches; 2.4 ounces
  • Item model number : 2401F-KT25-KT05
  • Batteries : 2 Unknown batteries required. (included)
  • Manufacturer : QIACHIP
  • Brand: QIACHIP
  • Special Feature: Universal
  • Max Number of Supported Devices: 20
  • Compatible Devices: Appliance, Car Battery Power, Car Sunroof, Electronic Door, Garage Door, Heating System, Motorcycle Alarm Appliance, Car Battery Power, Car Sunroof, Electronic Door, Garage Door, Heating System, Motorcycle AlarmAppliance, Car Battery Power, Car Sunroof, Electronic Door, Garage Door, Heating System, Motorcycle Alarm See more
  • Connectivity Technology: Radio Frequency
  • 433 Mhz universal wireless remote control switch: input voltage DC 5.5~24V, working mode is superheterodyne.
  • Transmission distance: about 50~100m (open space), if the transmission distance is not ideal, the antenna inside the receiver box can be pulled outside through the round hole of the box, which will be more conducive to reception.Support remote control type: EV1527 learning code. Supports up to 20 remote controllers (if the remote controller is lost, buy one to pair with the PCB board.)
  • PCB size: 47 x 26 x 18 mm (L,W,H), output terminals: NO , NC , COM.
  • It supports remote and wireless control of your car battery power, garage doors, electronic doors, appliances and other remote control devices, appliances, motorcycle alarms, car sunroofs, heating systems, and more. Bring you a brand new remote control experience, please don't miss it.
  • EASY TO USE: There are 4 function modes: Momentary, Toggle，Latched and Delay, please refer to the details page below for pairing.

Working mode settings 1.Reset : Press the learning button on the module 8 times continuously, and the light flashes seven times and then goes out. 2.Momentary Mode:Press Module learning button 1 time, the indicator light is always on, then press the remote control button, the indicator light flashes 3 times and then turns off , then the learning is successful; If the code is not successful , the indicator lights out of the learning state after 15 seconds . 3.Toggle Mode:Press the Module Learning button 2 times, the indicator light always turns on; then press the remote control button, the indicator lights flicker three times and then off, then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds. 4.Latched Mode :Press the receiver button 3 times, the receiver indicator light is always on, the receiver enters the code matching state, and then press the remote control button, the receiver indicator light flashes and then stays on, then press another button on the remote control, after the code is successful, the indicator light goes out. 5.Delay Mode : Press a certain number of times (4 times correspond to 5s/ 5 times correspond to 10s/ 6 times correspond to 15s/ 7 times correspond to 20s) to press the receiver button, the receiver indicator light is always on, the receiver enters the code matching state, then press the key of the remote controller, and the indicator light will go out after the code matching is successful.