For Dental Sectional Matrix

Thickness:0.038mm

Available Size:

3.5mm,4.5mm,5.5mm,6.5mm

Features:
1.Designed with hole protrusions, convenient to clamp, place and take out the formed piece
2.Form the adduction of the adjacent edge ridge
3.Conforms to the subgingival extension of the Tooth neck
4.Larger curvature can wrap and fit the tooth more stably
5.Restore tooth shape and Anatomical shape
6. The resin material has good elasticity and resilience, does not deform (note that the elastic limit cannot be exceeded).
7.Special reinforced matirial ensures the appropriate strength and elasticity;
8.Two rings: one is used for normal crowns, and the other is used for crowns with low crowns, deciduous crowns or irregularly arranged crowns.
9.Good elasticity and toughness, good clamping force, invariability after repeated use.
10.Close fit and good retention
11.Autoclavable

Powful Ring：

Used For Dental Tooth Filling Material Restoration

Power Ring has stronger strength than standard ring

Dental Rings designed for Installation of different types of  Matrices:
Metal Matrices, Transparent Matrix, Contoured Matrices,  Sectional Matrices.

Scope of application:
Suitable for resin filling. Make the molded piece tightly fit to the edge of the tooth.

Precautions:
1. The force of opening the clamping ring of the molded piece shall not exceed the elastic limit of the alloy, that is, the expansion shall not exceed 10 mm to avoid breakage.
2. Apply a rubber dam to the treatment area before use to ensure safe use.
3. The head of the pliers should be placed in a special part of the clamp ring to prevent loosening.

Instructions for use:
Use the rubber damper pliers to place the special clamping part in the clamping ring of the forming piece, open the clamping ring to the required gap width, then place the inner tooth gap in the inlet, and loosen the pliers to press the clamping ring to fix the forming piece.
After the treatment is completed, use pliers to remove it according to the insertion method.

Production Display：