• Features:
  • Condition: Brand New Mass Air Flow Sensor
  • Replacement: Directly Plug-in Replacement
  • Material: Plastic
  • Warranty: 1 Year
  • Note: Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number.
  • Contact us: Any question or problem, please contact us. 
  •  
  • Application:
  • 1998-2001 Nissan Altima 2.4L 1998-1994 Nissan 240SX 2.4L
  •  
  • Package Included:
  • 1pcs of brand new Mass Air Flow Sensor/Meter (MAF)
  •  
  • FAQ about the Mass Air Flow (MAF) Sensor:

    • MAF Replacement Mass Air Flow Sensor Meter For 1994 -98 Nissan 240SX 2.4L SU5056

    Features:

    Condition: Brand New Mass Air Flow Sensor

    Replacement: Directly Plug-in Replacement

    Material: Plastic

    Warranty: 1 Year

    Note: Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number.

    Contact us: Any question or problem, please contact us. 

     

    Application:

    1998-2001 Nissan Altima 2.4L
    1998-1994 Nissan 240SX 2.4L

     

    Package Included:

    1pcs of brand new Mass Air Flow Sensor/Meter (MAF)

     

    FAQ about the Mass Air Flow (MAF) Sensor:

    FAQ1: What does a MAF Sensor do?
    The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

    FAQ2: Where are these sensors located?
    The Mass Air Flow sensor is located in the intake ducting after the air filter.

    FAQ3: What are the common causes of failure?

    Typically these sensors fail due to exposure to the under hood heat from engine operation or if debris collects on the sensor element.

    FAQ4: How to check the MAF work or not? 
    Defective and dirty air mass sensors deliver faulty signals: Black Smoke; Power Shortage; Minimal operation

    FAQ5: How to replace the Mass Air Flow Sensor (MAF):

    • a. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    • b. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    • c. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    • d. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    • e. CAREFULLY plug the harness connector lead into the MAF sensor.

    Item Specifics
    Brand the-one-fp
    Manufacturer Part Number TH114044OE1
    Type Mass Airflow Sensor (MAF Sensor/Meter)
    Air & Fuel Sensor Type Mass Air Flow Sensor
    Warranty 1 Year
    Placement on Vehicle Front
    Color Black
    Interchange Part Number 226809, 22680900000
    Reference Part Number 22680-9E005, SU5056
    OE/OEM Part Number 221006M, 1570371
    Fitment For 1998-2001 Nissan Altima 2.4L
    Pin-Number 3 pins
    Fitment Type Direct Replacement
    Package 1pcs of Brand New MAF Sensor

    Shipping
    1.If you want to change the shipping address, please contact us by eBay messages.
     
    2.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
     
    3.Payment must be received within 10 days as auction ended or order might be delayed.
    Payment
    1. Orders processed within 24 hours of payment verification.
     
    2. The images shown are not the actual item and are for your reference only.
     
    3. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns
    1. You have 30 days to contact us and 10 days to return it from the date it was received. 
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
    Feedback

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Contact Us
    Any question, please contact us by email on working days.
     
    We're here for you!

    MAF Replacement Mass Air Flow Sensor Meter For 1994 -98 Nissan 240SX 2.4L SU5056

    Features:

    Condition: Brand New Mass Air Flow Sensor

    Replacement: Directly Plug-in Replacement

    Material: Plastic

    Warranty: 1 Year

    Note: Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number.

    Contact us: Any question or problem, please contact us. 

     

    Application:

    1998-2001 Nissan Altima 2.4L
    1998-1994 Nissan 240SX 2.4L

     

    Package Included:

    1pcs of brand new Mass Air Flow Sensor/Meter (MAF)

     

    FAQ about the Mass Air Flow (MAF) Sensor:

    FAQ1: What does a MAF Sensor do?
    The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

    FAQ2: Where are these sensors located?
    The Mass Air Flow sensor is located in the intake ducting after the air filter.

    FAQ3: What are the common causes of failure?

    Typically these sensors fail due to exposure to the under hood heat from engine operation or if debris collects on the sensor element.

    FAQ4: How to check the MAF work or not? 
    Defective and dirty air mass sensors deliver faulty signals: Black Smoke; Power Shortage; Minimal operation

    FAQ5: How to replace the Mass Air Flow Sensor (MAF):

    • a. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    • b. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    • c. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    • d. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    • e. CAREFULLY plug the harness connector lead into the MAF sensor.


    1.If you want to change the shipping address, please contact us by eBay messages.
     
    2.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
     
    3.Payment must be received within 10 days as auction ended or order might be delayed.
    1. Orders processed within 24 hours of payment verification.
     
    2. The images shown are not the actual item and are for your reference only.
     
    3. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    1. You have 30 days to contact us and 10 days to return it from the date it was received. 
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Any question, please contact us by email on working days.
     
    We're here for you!

    All right reserved.