Extender / riser PCB Eurocard DIN 41612 FR4 Double sided 220x100mm 2.54mm pitch with test points and PCB guide rails full KIT with 2x 96 pin connectors

KIT includes and you will receive:

- 1x PCB Eurocard 220x100mm

- 2x red PCB support guide rails (to assemble set of 2 rails as illustrated)

- 2x DIN41612 96pin (3x32pin) connectors (male and female)

- Hardware: 8x M2.5x8mm screws for guide rails and 4x M2.5x10mm screws for connectors = 1(12x M2.5 nutS)

Please note that this is kit and you will have to solder and assemble yourself.

Kit without connectors in my other auction https://www.ebay.co.uk/itm/284368205466

This extender/ raiser card can be used for various DIN standards as all connections are just extension of existing. ie. A1 -> A1....  

You can use these cards in industry standard DIN subrack or Eurorack.

Card also contains 3x32pin rows for test points and 3x32pin rows for Dupont connectors should you wish to use this for prototyping.

These are high quality FR4 boards and also most likely cheapest you can buy.

PCB support guide rails rails for extender card in RED colour. You have to assemble them yourself.

You have two big side PCBs and one middle as sandwich. All you have to do is to cut them out, smooth out mouse bite edges with sand paper and then bolt using supplied screws and nuts.

Pictures in auction listing are pretty much self explanatory, but please let me know if you need help with it.

Extender card:

• Board Type: Extender / raiser card
• Board Material: FR4-Standard Tg 130-140C Epoxy Glass Composite
• Layers: Double sided
• PCB Colour: Green colour solder mask, white silk screen lettering
• Surface Finish: Lead free HASL-RoHS
• External size: 220x100mm
• Board Thickness: standard 1.6mm fits in standard guide rail and standard Eurocard front panel
• Pitch: 2.54mm (100.00 mils)
• Hole matrix: 2 x 96 holes for DIN connector (192 holes in total), 2 x 96 holes for test points and Dupont connectors
• Hole size: 1.00mm
• Mounting holes: Standard pitch DIN 41612. 4x mounting holes 2.50mm / 3.00mm
• Board Connectorst: DIN 41612 3x32pin 96 Pin male and female connector. Connector will fit in 3x32 (96pin) or 3x32 (64pin) connectors. 
• Copper Thickness: 35um
• 
  
• 
  

PCB support guide rails:

• Board Type: Extender / raiser card
• Board Material: FR4-Standard Tg 130-140C Epoxy Glass Composite
• Layers: Double sided
• PCB Colour: Red solder mask
• Surface Finish: Lead free HASL-RoHS
• External size: 100x100mm, assembled approx. 90 x 14mm x 5mm
• Board Thickness: 1.60mm
• 
  
• Kit weight: 200g

Check out my other auctions!

----------------------------------------------------------------------------------------------------------------------------------------

Shipping via Royal Mail 1st / 2nd class or Collection from Kent, UK. International shipping:  available directly via Royal Mail in Europe or  International eBay shipping programme.  No shipping to Italy due to problems with customs and the Russian Federation due to the complicated geopolitical situation.

Don't hesitate to ask any questions and check out my seller feedback.

Disclaimer:

• Do not use it for critical or mission-sensitive applications.

• I do not take responsibility for any damage to your equipment or any other consequences resulting from its use.

• Always verify the pinout configuration of listed items prior to purchase, as pin configurations may vary to your device.

• It is the responsibility of the purchaser to locate all required parts and information required to complete projects.

• Proceed at your own risk.

• If you do not agree with this policy then please do not order from me.